Genuine Buick Skylark Parking Brake Cable

Buick Skylark Parking Brake Cable Parts Questions & Answers

• Cable Asm,Parking Brake Front
  25518753
  Q: How do you depress the front parking brake pedal and remove the cable?

  A: Depress the parking brake pedal. Clamp locking pliers on the cable where it enters its casing. Pull the brake release and remove the cable from the control assembly. Release the locking tabs on the casing and remove the casing from the control assembly. Push the grommet and cable through the cowl and into the engine compartment. Remove the cable from its guide bracket attached to the engine cowl. Remove the cable from its guide attached to the underside of the rocker panel. Remove the cable from the equalizer lever. Installation is the reverse of the removal procedure.
• Cable,Parking Brake(Rear)
  25516528
  Q: How to remove and install the rear right brake shoes and parking brake cable on a Buick Skylark,Oldsmobile Omega and Pontiac Phoenix?

  A: Support the rear of the car on jackstands and remove the wheel and brake drum. With a screwdriver inserted between the brakeshoe and the top part of the brake adjuster bracket, push the bracket to the front and release the top adjuster bracket rod. Remove the rear hold-down spring and remove the actuator lever and lever return spring. Remove the adjuster screw spring. Remove the top rear brake shoe return spring. Unhook the parking brake cable from the parking brake lever. Compress the locking spring tabs securing the parking brake cable to the backing plate and withdraw the cable. Mark the location of the adjusting nut so the parking brake adjustment will not be lost, then remove the adjusting nut that.secures the equalizer to its retaining bolt and remove the bolt. Compress the locking spring tabs of the cable casing and remove the cable from the guide bracket. Unhook the cable from the connector on the rear axle, that connects it to the left rear cable. Remove the cable casing from the rear axle. Installation Is the reverse of the removal procedure. When the operation is complete check that the parking brake adjustment is correct, and adjust If necessary.
• Cable Asm,Parking Brake Rear
  25518755
  Q: How to remove the rear left parking brake cable from the brake for Buick Skylark,Oldsmobile Omega and Pontiac Phoenix?

  A: Remove the parking brake cable from the brake by following the procedure described in paragraphs 1 through 7. Remove the cable casing from the rear axle. Unhook the cable from the connector on the rear axle that connects it to the right rear cable. Installation is the reverse of the removal procedure.