On 6.0L models, the ECT sensor is located on the left cylinder head, in front of cylinder No. 1, just below the valve cover, while on non-6.0L models, it is positioned to the right of the throttle body, next to the thermostat housing. Begin by draining the cooling system to a level below the ECT sensor. For non-6.0L models, remove the air intake duct. Disconnect the electrical connector from the ECT sensor, then unscrew and remove the sensor. If reinstalling the old sensor, apply thread sealant to the threads; a new sensor should already have sealant applied. Installation follows the reverse order of removal, ensuring the ECT sensor is tightened to the specified torque. Finally, refill the cooling system.