To replace the side view mirror, start by removing the door trim panel and the window frame trim panel; if the mirror cover has a speaker, disconnect its electrical connector. Next, disconnect the electrical connector from the mirror, then remove the mirror mounting nuts and the mirror itself. For installation, reverse the removal steps. When replacing the mirror glass, take precautions as it can break easily; wear safety glasses and gloves. Use a plastic trim tool to insert between the two tabs in the outer corner and twist to free the glass from the motor, noting that for 2007 and earlier models, the tool should be inserted from the top. If the mirrors are heated, disconnect the electrical connectors. Connect the wires to the new mirror glass and snap it onto the motor. For the inside mirror, disconnect the sensor cover clips, remove the cover and electrical connector, then remove or install the Ton screw or set screw at the base on the windshield. If the mount plate has detached from the windshield, adhesive kits are available at auto parts stores to re-secure it, following the included instructions.