How to remove and install valve lifters,Camshaft Bearing and pushrods in Cadillac ElDorado and Fleetwood?

For 4.5L and 4.9L engines, maintain valve lifter and pushrod order during removal and installation. Remove the intake manifold and valve covers to access lifters. "O" markings indicate oversize lifters. Reinstall associated components. For the 4.6L engine, start by removing the camshaft cover. Next, remove camshafts and lifters, storing lifters face-down for oil retention. Return lifters to original bores during installation, followed by camshafts and cover.

Genuine Cadillac Eldorado Camshaft Bearing

Enter your vehicle info to find more parts and verify fitment

Select Vehicle by VIN
Select Vehicle by Model

Select by VIN

Enter your VIN for the most accurate results.

Select by Model

-- Select Make --

-- Select Model --

-- Select Year --

3 Camshaft Bearings found

View related parts
Cadillac Eldorado Bearing
Part Number: 1637031
- Other Name: BEARING, Engine Camshaft Thrust; Camshaft Bearings
More Info
Fits the following Vehicles:
1986-1993 Cadillac Eldorado | COMMERCIAL CHASSIS, ELDORADO | 8 Cyl 4.1L, 8 Cyl 4.5L, 8 Cyl 4.9L
Less Info
View related parts
Cadillac Eldorado Bearing,Camshaft Front & Rear
Part Number: 25524301
- Other Name: BEARING
- Position: Front and Rear
More Info
Fits the following Vehicles:
1982 Cadillac Eldorado | ELDORADO | 6 Cyl 4.1L
Less Info
View related parts
Cadillac Eldorado Bearing, Camshaft #1(260,307,350&403 All)
Part Number: 12339842
- Other Name: BEARING, Engine Camshaft & Balance Shaft Front
More Info
Fits the following Vehicles:
1982-1985 Cadillac Eldorado | BIARRITZ, COMMERCIAL CHASSIS, ELDORADO | 8 Cyl 5.7L Diesel
Less Info

Cadillac Eldorado Camshaft Bearing Parts Questions & Answers

Bearing
1637031
Q: How to remove and install valve lifters,Camshaft Bearing and pushrods in Cadillac ElDorado and Fleetwood?
A: For 4.5L and 4.9L engines, maintain valve lifter and pushrod order during removal and installation. Remove the intake manifold and valve covers to access lifters. "O" markings indicate oversize lifters. Reinstall associated components. For the 4.6L engine, start by removing the camshaft cover. Next, remove camshafts and lifters, storing lifters face-down for oil retention. Return lifters to original bores during installation, followed by camshafts and cover.