How to address the Door Handle, Door Latch Assembly and Door Lock Cylinder removal and installation process on Cadillac Escalade?

Taking the door latch first, raise the window to its fullest extent, then, taking attention not to tear the watershield along with the door trim panel. It is possible to get at the door latch connections by removing the actuator rods from the lock cylinder, and the rear window guide track; if required the rear window regulator track needs to be unbolted and shifted aside. Subsequently, use the three Torx-head mounting screws to pull out the latch from the door, and unfuss any rods and the electrical connectors, disengage the inside release lever cable, and fully extract the latch out. The lock cylinder requires removal of the door panel and watershield and also the outside handle will conceal a small screw. Remove the outside latch assembly and push the particular lock cylinder retainer and then take out the lock cylinder from the latch assembly. The process of installation is the reverse of the removal process that has been discussed above. To remove the outside handle, you should first open the door, pop off the plastic protective cap which unveals a screw, and then twist of the end cap. Push the rear portion of the handle upwards and move it to the right or snap the front hook out before pulling the handle out. The installation process also goes in the opposite direction: To the inside release handle, you need to strip the door by taking out the door trim panel and electrical connectors, then by unbolting the handle from the door panel by the five screws, you remove the actuator rod, and finally the inside handle assembly. Any switches or other components which may be attached to the old handle should be transferred to the new one with installation working in the opposite manner to the removal. Based on misaligned latch strikers, one need to release bolts around the striker, place the striker to the right position and fix it in a manner that it is lined up with latch and fixed tightly. Care must be taken at the striker mounting plate which can drop off if both screws are loosened at a time. If after making the adjustment the door is not opened in the right way, it may be due to the hinges are worn out, or the door is misaligned. There are two latches/strikers on access doors; the upper latch striker is fixed to the car roof and involves the removal of the trim to get an access. One problem with doors is that they may sag, which results in misalignment; original equipment manufacturers of tools for door realignment exist, but such tools are costly.

Genuine Cadillac Escalade Door Lock Cylinder

Door Lock Cylinder Tumbler

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

13 Door Lock Cylinders found

View related parts
Cadillac Escalade Cylinder Kit,Front Side Door Lock(Uncoded)
Part Number: 15298924
$138.03 MSRP: $207.29
You Save: $69.26 (34%)
ADD TO CART
Product Specifications
- Other Name: CYLINDER KIT, Door Lock Cylinder; Lock Cylinder
- Position: Front
- Replaces: 88937321
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2006 Cadillac Escalade | 1/2 TON, 3/4 TON, EXT 1/2 TON, EXT 3/4 TON, YUKON/DENALI/ESCALADE | 8 Cyl 5.3L, 8 Cyl 6.0L
View related parts
Cadillac Escalade Front Side Door Lock Cylinder Kit (Uncoded)
Part Number: 13590041
$71.16 MSRP: $106.39
You Save: $35.23 (34%)
ADD TO CART
Product Specifications
- Other Name: Cylinder Kit, Front Side Door Lock (Uncoded); Control Rod, Cover, Lock Cylinder, Rod
- Position: Front
- Replaces: 13586486
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2022-2024 Cadillac Escalade | 1/2 TON, YUKON XL/DENALI XL/ESCALADE ESV | 6 Cyl 3.0L Diesel, 8 Cyl 5.3L, 8 Cyl 6.2L
- 2015-2020 Cadillac Escalade | 1/2 TON, 1500 4 DOOR, 1500 4 DOOR SUV, 1500 4 DOOR UTILITY, 4 DOOR 1/2 TON | 8 Cyl 6.2L
View related parts
Cadillac Escalade Cylinder,Rear Door Lock
Part Number: 12549131
$61.33 MSRP: $91.69
You Save: $30.36 (34%)
ADD TO CART
Product Specifications
- Other Name: CYLINDER, Door Lock Cylinder; Cylinder, Lock Cylinder
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2000 Cadillac Escalade | 1 TON CREW CAB, 1/2 TON, 3/4 TON, 4 DOOR 1/2 TON, CLASSIC 4 DOOR 1/2 TON, CREW CAB 1 TON, EXTENDED CAB 1 TON, EXTENDED CAB 6'6" BOX 1/2 TON, EXTENDED CAB 6'6" BOX 3/4 TON, EXTENDED CAB 8' BOX 3/4 TON, K2500 CREW CAB, K3500 CAB CHASSIS 135.5, K3500 CAB CHASSIS 159.9, REGULAR CAB 1 TON, REGULAR CAB 3/4 TON, YUKON/DENALI/ESCALADE | 8 Cyl 5.7L
View related parts
Cadillac Escalade Cylinder Asm,Front Side Door Lock
Part Number: 20825032
$158.51 MSRP: $238.05
You Save: $79.54 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: CYLINDER KIT, Door Lock Cylinder; Lock Cylinder
- Position: Front
- Replaces: 20825033, 15904634
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2014 Cadillac Escalade | 1/2 TON, EXT 1/2 TON, YUKON XL/DENALI XL/ESCALADE ESV, YUKON/DENALI/ESCALADE | 8 Cyl 6.0L, 8 Cyl 6.0L Flex, 8 Cyl 6.2L, 8 Cyl 6.2L Flex
View related parts
Cadillac Escalade Cylinder Kit, Pick Up Box End Gate Lock (Uncod)
Part Number: 23189756
$84.42 MSRP: $121.32
You Save: $36.90 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: CYLINDER KIT, End Gate Lock; Lock Cylinder
- Replaces: 22855170
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015 Cadillac Escalade | 1500 CREW CAB, 1500 CREW CAB STANDARD BOX, CLASSIC 1500 CREW CAB LONG BOX, CLASSIC 1500 EXTENDED CAB STANDARD BOX, CLASSIC 1500 REGULAR CAB LONG BOX, CLASSIC 1500 REGULAR CAB STANDARD BOX | 8 Cyl 6.2L
View related parts
Cadillac Escalade Cylinder Kit,Front Side Door Lock(Uncoded)
Part Number: 15822397
$91.35 MSRP: $131.28
You Save: $39.93 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: CYLINDER KIT, Door Lock Cylinder; Lock Cylinder, Lock Cylinder Assy
- Position: Front
- Replaces: 12457616, 12528549, 88955980
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002 Cadillac Escalade | YUKON/DENALI/ESCALADE | 8 Cyl 5.3L, 8 Cyl 6.0L
View related parts
Cadillac Escalade Cylinder Kit,Instrument Panel Compartment Door Lock (Uncoded)
Part Number: 20765510
$54.10 MSRP: $80.88
You Save: $26.78 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: CYLINDER KIT, Instrument Panel Compartment; Cylinder, Lock Cylinder
- Replaced by: 13552389
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 Cadillac Escalade | 1/2 TON, YUKON XL/DENALI XL/ESCALADE ESV, YUKON/DENALI/ESCALADE | 6 Cyl 3.0L Diesel, 8 Cyl 5.3L, 8 Cyl 6.2L
- 2015 Cadillac Escalade | 1500 CREW CAB, 1500 CREW CAB STANDARD BOX, 3500 CREW CAB ONLY, 3500 CREW CAB STANDARD BOX, 3500 REGULAR CAB, CLASSIC 1500 CREW CAB LONG BOX, CLASSIC 1500 EXTENDED CAB STANDARD BOX, CLASSIC 1500 REGULAR CAB LONG BOX, CLASSIC 1500 REGULAR CAB STANDARD BOX, CLASSIC 2500 CREW CAB LONG BOX, CLASSIC 2500 CREW CAB STANDARD BOX, CLASSIC 2500 EXTENDED CAB LONG BOX, CLASSIC 2500 EXTENDED CAB STANDARD BOX, CLASSIC 2500 REGULAR CAB, CLASSIC 3500 CREW CAB, CLASSIC 3500 EXTENDED CAB, CLASSIC 3500 REGULAR CAB | 8 Cyl 6.2L
View related parts
Cadillac Escalade Cylinder Asm,Rear Door Lock
Part Number: 12476272
$14.84 MSRP: $22.19
You Save: $7.35 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: CYLINDER, Door Lock Cylinder; Cylinder, Lock Cylinder
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2004 Cadillac Escalade | YUKON/DENALI/ESCALADE | 8 Cyl 5.3L, 8 Cyl 6.0L
View related parts
Cadillac Escalade CYLINDER KIT-I/P COMPT DR LK (UNCODED)
Part Number: 13552389
$54.10 MSRP: $80.88
You Save: $26.78 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder, Lock Cylinder
- Replaces: 20765510
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2024 Cadillac Escalade | 1/2 TON, YUKON XL/DENALI XL/ESCALADE ESV, YUKON/DENALI/ESCALADE | 6 Cyl 3.0L Diesel, 8 Cyl 5.3L, 8 Cyl 6.2L
- 2015 Cadillac Escalade | 1500 CREW CAB, 1500 CREW CAB STANDARD BOX, 3500 CREW CAB ONLY, 3500 CREW CAB STANDARD BOX, 3500 REGULAR CAB, CLASSIC 1500 CREW CAB LONG BOX, CLASSIC 1500 EXTENDED CAB STANDARD BOX, CLASSIC 1500 REGULAR CAB LONG BOX, CLASSIC 1500 REGULAR CAB STANDARD BOX, CLASSIC 2500 CREW CAB LONG BOX, CLASSIC 2500 CREW CAB STANDARD BOX, CLASSIC 2500 EXTENDED CAB LONG BOX, CLASSIC 2500 EXTENDED CAB STANDARD BOX, CLASSIC 2500 REGULAR CAB, CLASSIC 3500 CREW CAB, CLASSIC 3500 EXTENDED CAB, CLASSIC 3500 REGULAR CAB | 8 Cyl 6.2L
View related parts
Cadillac Escalade Cylinder Kit, Front S/D Lk (Uncoded)
Part Number: 13535140
$86.40 MSRP: $129.18
You Save: $42.78 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Kit, Frt S/D Lk (Uncoded); Lock Cylinder
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2024 Cadillac Escalade | 1/2 TON, YUKON XL/DENALI XL/ESCALADE ESV, YUKON/DENALI/ESCALADE | 6 Cyl 3.0L Diesel, 8 Cyl 5.3L, 8 Cyl 6.2L
View related parts
Cadillac Escalade Cylinder Kit, End Gate Lock (Uncoded)
Part Number: 15785101
$124.21 MSRP: $186.54
You Save: $62.33 (34%)
Product Specifications
- Other Name: CYLINDER, End Gate Lock
- Replaces: 88944026
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2006 Cadillac Escalade | EXT 1/2 TON | 8 Cyl 5.3L, 8 Cyl 6.0L
View related parts
Cadillac Escalade Cylinder Assembly, End Gate Lock
Part Number: 15785103
$25.32 MSRP: $37.86
You Save: $12.54 (34%)
Product Specifications
- Other Name: CYLINDER, End Gate Lock; Cylinder, Lock Cylinder
- Replaces: 88955861
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2006 Cadillac Escalade | 1/2 TON, YUKON/DENALI/ESCALADE | 8 Cyl 5.3L, 8 Cyl 6.0L
View related parts
Cadillac Escalade Cylinder Asm,Rear Door Lock
Part Number: 88937334
$211.38 MSRP: $317.45
You Save: $106.07 (34%)
Product Specifications
- Other Name: CYLINDER, Door Lock Cylinder; Lock Cylinder
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002 Cadillac Escalade | YUKON/DENALI/ESCALADE | 8 Cyl 5.3L, 8 Cyl 6.0L

Cadillac Escalade Door Lock Cylinder

The Door Lock Cylinder in Cadillac Escalade is an important part installed in the front door which is used to lock and unlock doors with the help of the key placed in the car. It guarantees safe access to the interior of the car while at the same time being convenient to use. With time the actuators wear out during frequent operation and moving the doors in can prove a real challenge or even worse, the key could get stuck or fail to turn. Modern cars designers seem to have done away with the door lock cylinders, but the Cadillac Escalade is not among them. Consequently, the Cadillac Escalade vehicles should undergo predefined maintenance routines and replace the Door Lock Cylinder when required to uphold the motor vehicle's efficient functionality and security.

Each OEM Cadillac Escalade Door Lock Cylinder we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Cadillac Escalade Door Lock Cylinder Parts Questions & Experts Answers

Front Side Door Lock Cylinder Kit (Uncoded)
13590041
Q: How to address the Door Handle, Door Latch Assembly and Door Lock Cylinder removal and installation process on Cadillac Escalade?
A:
Taking the door latch first, raise the window to its fullest extent, then, taking attention not to tear the watershield along with the door trim panel. It is possible to get at the door latch connections by removing the actuator rods from the lock cylinder, and the rear window guide track; if required the rear window regulator track needs to be unbolted and shifted aside. Subsequently, use the three Torx-head mounting screws to pull out the latch from the door, and unfuss any rods and the electrical connectors, disengage the inside release lever cable, and fully extract the latch out. The lock cylinder requires removal of the door panel and watershield and also the outside handle will conceal a small screw. Remove the outside latch assembly and push the particular lock cylinder retainer and then take out the lock cylinder from the latch assembly. The process of installation is the reverse of the removal process that has been discussed above. To remove the outside handle, you should first open the door, pop off the plastic protective cap which unveals a screw, and then twist of the end cap. Push the rear portion of the handle upwards and move it to the right or snap the front hook out before pulling the handle out. The installation process also goes in the opposite direction: To the inside release handle, you need to strip the door by taking out the door trim panel and electrical connectors, then by unbolting the handle from the door panel by the five screws, you remove the actuator rod, and finally the inside handle assembly. Any switches or other components which may be attached to the old handle should be transferred to the new one with installation working in the opposite manner to the removal. Based on misaligned latch strikers, one need to release bolts around the striker, place the striker to the right position and fix it in a manner that it is lined up with latch and fixed tightly. Care must be taken at the striker mounting plate which can drop off if both screws are loosened at a time. If after making the adjustment the door is not opened in the right way, it may be due to the hinges are worn out, or the door is misaligned. There are two latches/strikers on access doors; the upper latch striker is fixed to the car roof and involves the removal of the trim to get an access. One problem with doors is that they may sag, which results in misalignment; original equipment manufacturers of tools for door realignment exist, but such tools are costly.