To reach the headlight switch, and the dome light override knob on the basic instrument cluster, start by using a flat trim evacuation tool, to gently pull on the left side trim panel from the dashboard. Finally remove the headlamp switch's electrical connector and by pulling and gently lifting you release the locking clips and extract headlamp switch from the headlight switch housing. Incorporated every time the headlight switch is reinstalled into a proper position where it fits squarely into the trim panel and installation is the procedure in the reversal of the removal. The multi-function switch is attached to top of the steering column and functions as turn signal, hazard flasher and switch also serves as the hazard flasher.