To remove the mirror, unplug the negative battery terminal first, and then you will have to take off the door trim panel, and then disconnect the connector. If necessary, remove such parts as trim plate and foam sound insulator for the further work. Third, take off all three of the mounting nuts and the mirror-to reach it, take off the black plastic cap under the door weatherstrip in order to get to the forward nut. For installation, place the mirror near the door and screw into the mounting nuts making sure that it is tightened to clockwise 54 inch lbs. (6 Nm). Put back the black plastic cap under the weatherstrip, connect the wiring connector, and if required one should replace the foam sound insulator as well as the mirror trim plate. Last but not the least, replace the door trim panel and bring back the negative terminal of the battery to life.