How to remove and install the fender splash shield on Chevrolet Beretta?

Block the wheels, clear the Brake applied, and raise the car and, securely jack and support it before removing the front wheel. The Fender Splash Shield is fixed in place by special plastic retainers; the heads of the retainers can be removed only with wires and without cutting off the retainer bodies. Upon the discharge of all retainers, ensure they are no longer on the Fender Splash Shield. If there is a shield, slide the shield out and pull the ends to ensure it comes out of the fender well. For installation, position the shield and align the retainer holes, snap in the retainers by forcing the heads in till they click into position.

Genuine Chevrolet Beretta Fender Splash Shield

Wheelhouse Liner

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Fender Splash Shields found

View related parts
Chevrolet Beretta Front Wheelhouse Panel Splash Shield
Part Number: 14103441
$13.05
ADD TO CART
Product Specifications
- Other Name: SHIELD, Front Fender Inner Wheel House; Hole Cover, Shield, Splash Shield, Wheel Shield
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1987-1996 Chevrolet Beretta | 2 DOOR, 4 DOOR, 4 DOOR NOTCHBACK, LTZ, Z26 2 DOOR | 4 Cyl 2.0L, 4 Cyl 2.2L, 4 Cyl 2.3L, 6 Cyl 2.8L, 6 Cyl 3.1L
View related parts
Chevrolet Beretta Engine Splash Shield
Part Number: 22636582
Product Specifications
- Other Name: SHIELD, Front Fender Inner Wheel House; Splash Shield
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1996 Chevrolet Beretta | 2 DOOR, 4 DOOR, Z26 2 DOOR | 4 Cyl 2.2L, 4 Cyl 2.3L, 6 Cyl 3.1L
View related parts
Chevrolet Beretta Shield, Engine Splash Lh
Part Number: 22551455
Product Specifications
- Other Name: SHIELD, Front Fender Inner Wheel House; Splash Shield
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1996 Chevrolet Beretta | 2 DOOR, 4 DOOR, Z26 2 DOOR | 4 Cyl 2.2L, 4 Cyl 2.3L, 6 Cyl 3.1L
View related parts
Chevrolet Beretta Engine Splash Shield
Part Number: 22538637
Product Specifications
- Other Name: SHIELD, Front Fender Inner Wheel House; Shield, Splash Shield
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1987-1991 Chevrolet Beretta | 2 DOOR, 4 DOOR, 4 DOOR NOTCHBACK, LTZ | 4 Cyl 2.0L, 4 Cyl 2.2L, 4 Cyl 2.3L, 6 Cyl 2.8L, 6 Cyl 3.1L
View related parts
Chevrolet Beretta Front Wheelhouse Panel Splash Shield
Part Number: 14103442
Product Specifications
- Other Name: SHIELD, Front Fender Inner Wheel House; Hole Cover, Shield, Splash Shield, Wheel Shield
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1987-1996 Chevrolet Beretta | 2 DOOR, 4 DOOR, 4 DOOR NOTCHBACK, LTZ, Z26 2 DOOR | 4 Cyl 2.0L, 4 Cyl 2.2L, 4 Cyl 2.3L, 6 Cyl 2.8L, 6 Cyl 3.1L
View related parts
Chevrolet Beretta Shield, Engine Splash Lh
Part Number: 22565299
Product Specifications
- Other Name: SHIELD, Front Fender Inner Wheel House; Splash Shield
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1996 Chevrolet Beretta | 2 DOOR, 4 DOOR, Z26 2 DOOR | 4 Cyl 2.2L, 4 Cyl 2.3L, 6 Cyl 3.1L

Chevrolet Beretta Fender Splash Shield

The Fender Splash Shield fits in the wheel well of the Chevrolet Beretta to protect it from stones, water, and corrosive slush. The Fender Splash Shield is designed to keep gravel and salt from hitting metal fenders by sitting behind every wheel. This prevents the paint from chipping and rust from forming. Earlier vehicles applied stamped metal inner panels, but most Chevrolet vehicles switched to lighter thermoplastic versions of the Fender Splash Shield that flex instead of dent, resist chemicals, and shed mud more easily. No matter the material, every Fender Splash Shield is designed to create a barrier that protects against dirt and debris from finding its way underneath the hood or trunk. It helps prolong the life of wiring, suspension bits, and other similar components. The shield on the sporty Beretta is also designed to work in conjunction with surrounding wheelhouse pieces, ensuring correct alignment of outer fenders and preventing rattling. If a collision bends or twists the wheel opening, a damaged Fender Splash Shield can be replaced to restore full coverage and maintain the lively Beretta feel Chevrolet fans love.

Each OEM Chevrolet Beretta Fender Splash Shield we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Chevrolet Beretta Fender Splash Shield Parts Questions & Experts Answers

Engine Splash Shield
22636582
Q: How to remove and install the fender splash shield on Chevrolet Beretta?
A:
Block the wheels, clear the Brake applied, and raise the car and, securely jack and support it before removing the front wheel. The Fender Splash Shield is fixed in place by special plastic retainers; the heads of the retainers can be removed only with wires and without cutting off the retainer bodies. Upon the discharge of all retainers, ensure they are no longer on the Fender Splash Shield. If there is a shield, slide the shield out and pull the ends to ensure it comes out of the fender well. For installation, position the shield and align the retainer holes, snap in the retainers by forcing the heads in till they click into position.