How to remove and install the Trunk Lock Cylinder on Chevrolet Beretta?

Lift the trunk lid; remove the lock cylinder from the vehicle using a screwdriver and plier to open the lock 'shackle' then pry of the retaining clip off and pull the lock cylinder out of it, which may also require turning the plastic trim panel and using a 5/32-inch drill to remove the lock cylinder retaining rivets. Subsequently, to fit the lock cylinder, the latter is put in place and anchored with the help of the clip.

Genuine Chevrolet Beretta Trunk Lock Cylinder

Back Door Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Trunk Lock Cylinders found

View related parts
Chevrolet Beretta Rear Compartment Lid Lock Cylinder
Part Number: 12502670
$6.76 MSRP: $10.10
You Save: $3.34 (34%)
Product Specifications
- Other Name: Cylinder,Rear Compartment Lid Lock; Cylinder, Cylinder & Key, Lock Cylinder
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1996 Chevrolet Beretta | 4 DOOR | 4 Cyl 2.2L, 4 Cyl 2.3L, 6 Cyl 3.1L
View related parts
Chevrolet Beretta Lift Gate Lock Cylinder Kit (Uncoded)
Part Number: 12398670
Product Specifications
- Other Name: Cylinder Kit,Lift Gate Lock (Uncoded); Cylinder, Lock Cylinder
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1987-1990 Chevrolet Beretta | 2 DOOR | 4 Cyl 2.0L, 4 Cyl 2.2L, 4 Cyl 2.3L, 6 Cyl 2.8L, 6 Cyl 3.1L
View related parts
Chevrolet Beretta Rear Compartment Lid Lock Cylinder Kit (Uncoded)
Part Number: 12398667
Product Specifications
- Other Name: Cylinder Kit,Rear Compartment Lid Lock (Uncoded)
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1987-1990 Chevrolet Beretta | 4 DOOR, 4 DOOR NOTCHBACK, LTZ | 4 Cyl 2.0L, 4 Cyl 2.2L, 4 Cyl 2.3L, 6 Cyl 2.8L, 6 Cyl 3.1L
View related parts
Chevrolet Beretta Rear Compartment Lid Lock Cylinder Package (Uncoded)
Part Number: 12506775
$6.76 MSRP: $10.10
You Save: $3.34 (34%)
Product Specifications
- Other Name: Cylinder Pkg, Rear Compartment Lid Lock (Uncoded); Cylinder, Lock Cylinder
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1996 Chevrolet Beretta | 2 DOOR, Z26 2 DOOR | 4 Cyl 2.2L, 4 Cyl 2.3L, 6 Cyl 3.1L
View related parts
Chevrolet Beretta Lift Gate Lock Cylinder Kit (Uncoded)
Part Number: 12507407
Product Specifications
- Other Name: Cylinder Kit,Lift Gate Lock (Uncoded); Lock Cylinder
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1989-1991 Chevrolet Beretta | 4 DOOR PLAIN BACK HATCHBACK | 4 Cyl 2.0L, 4 Cyl 2.2L, 4 Cyl 2.3L, 6 Cyl 2.8L, 6 Cyl 3.1L

Chevrolet Beretta Trunk Lock Cylinder

The Chevrolet Beretta Trunk Lock Cylinder enables the owner to secure the trunk so that any items stored inside are kept safe. Located at the rear deck, this Trunk Lock Cylinder accepts the same metal key that operates the doors. The lock rotates a compact set of tumblers that pulls an internal latch tight so the lid cannot be pried open. When the key is turned the other way, the tumblers of the Trunk Lock Cylinder realign. This frees the latch, allowing quick access to tools, a spare tire, or any other equipment that cannot fit in the cabin. A working Trunk Lock Cylinder is the optimal defense between the valuables in your trunk and a would-be thief. That is because your trunk often carries costly fishing rigs, building materials, or electronics. The Chevrolet Beretta production run featured use of only a single straightforward keyed style that is easy to use, reliable, and was chosen for its simplicity over complex variations. Many Chevrolet owners appreciate this proven simplicity. When going to a jobsite or weekend trip, clean and lubricate the Trunk Lock Cylinder to ensure cargo security and practical utility found with every Beretta.

Each OEM Chevrolet Beretta Trunk Lock Cylinder we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Chevrolet Beretta Trunk Lock Cylinder Parts Questions & Experts Answers

Rear Compartment Lid Lock Cylinder
12502670
Q: How to remove and install the Trunk Lock Cylinder on Chevrolet Beretta?
A:
Lift the trunk lid; remove the lock cylinder from the vehicle using a screwdriver and plier to open the lock 'shackle' then pry of the retaining clip off and pull the lock cylinder out of it, which may also require turning the plastic trim panel and using a 5/32-inch drill to remove the lock cylinder retaining rivets. Subsequently, to fit the lock cylinder, the latter is put in place and anchored with the help of the clip.