Genuine Chevrolet Cadet PCV Valve Elbow

Position Crank Ventilation Valve Elbow
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 PCV Valve Elbow found

  • Chevrolet Cadet PCV Valve Elbow - 14082446
    View related parts
    Product Specifications
    • Other Name: CONNECTOR, Engine Crankcase Ventilation
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    Fits the following Vehicles:
    • 1985-1986 Chevrolet Cadet | 2 DOOR HATCHBACK, 2 DOOR NOTCHBACK, 4 DOOR, CONVERTIBLE, CS 2 DOOR HATCHBACK, CS 4 DOOR, CS STATION WAGON, RS 2 DOOR HATCHBACK, RS 2 DOOR NOTCHBACK, RS 4 DOOR, RS CONVERTIBLE, RS STATION WAGON, STATION WAGON, Z24 2 DOOR NOTCHBACK, Z24 2 DOOR PLAINBACK HATCHBACK | 6 Cyl 2.8L

Chevrolet Cadet PCV Valve Elbow

The Chevrolet Cadet PCV Valve Elbow ensures the crankcase vapors are sealed off to help protect gaskets and help engine efficiency. This molded bend is a favorite among enthusiasts and continues to perform its task no matter how the PCV Valve Elbow alters flow. Each Chevrolet model that bore the experimental name Cadet featured a PCV Valve Elbow that connects the valve and manifold so fresh air can draw blow-by back into combustion for cleaner power. If a cracked PCV Valve Elbow was leaking vacuum when idle, it would trigger dash lights. This is why it matters. The updated rubber compound, which resists heat and oil, means that the driver can keep their mind on the road rather than the engine. The intake location of the prototype Cadet sedans and later performance Cadet trims remained unchanged by Chevrolet, allowing the same valve to click in without any tool usage on all prototypes. Replacing one restores factory vacuum balance within minutes, efficient at saving fuel and preserving oil cleanliness in older Chevrolet rides. After installation, the PCV Valve Elbow works hard with minimal noise. Because of this, its result is a steadier idle, less sludge, and fewer fumes from the oil cap. These improvements also lessen cabin contamination with hydrocarbons. A reinforced lip on each end keeps clamps tight during hard pulls, a detail that separates this PCV Valve Elbow from generic elbows that will collapse. It is trusted by operators as every Chevrolet relies on balanced crankcase pressure to prevent gasket blowouts. A Chevrolet trademark behind it, the Cadet lineage gains extra durability. A properly made PCV Valve Elbow can bring lasting gains in performance, efficiency, and safety. Every Cadet owner that installs a new PCV Valve Elbow quickly notices enhanced throttle response and cleaner emissions.

Each OEM Chevrolet Cadet PCV Valve Elbow we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Related Chevrolet Cadet Parts