How to remove and reinstall the fuel pump and fuel pump flow control module in a Chevrolet Camaro?

The vehicle has two fuel pump modules. The primary module includes the fuel pump, fuel level sender, and filter. The secondary module has a fuel level sender and fuel pick up. These parts can't be serviced separately. The Fuel Pump Driver Module (FPDM) regulates fuel pressure. To remove the primary module, relieve fuel pressure, disconnect the electrical connector and fuel line, rotate the locking ring counterclockwise, and pull the module out. Check and replace the O-ring if needed. The secondary module removal process is similar. The FPDM is behind the right-rear quarter trim panel. Access it by removing the rear seat and panel, disconnect the connector, and remove the mounting nut. Reinstall in reverse order.

Genuine Chevrolet Camaro Fuel Pump Driver Module

Enter your vehicle info to find more parts and verify fitment

Select Vehicle by VIN
Select Vehicle by Model

Select by VIN

Enter your VIN for the most accurate results.

Select by Model

-- Select Make --

-- Select Model --

-- Select Year --

3 Fuel Pump Driver Modules found

View related parts
Chevrolet Camaro Fuel Pump Power Control Module Assembly
Part Number: 23382215
- Other Name: Module Assembly, Fuel Pump Power Control; Control Module, Fuel Pump Controller, Module
- Replaces: 23184800, 23199128, 23482843, 20856290
$68.16 MSRP: $171.85
You Save: $103.69 (61%)

Add to Cart
More Info
Fits the following Vehicles:
2017-2022 Chevrolet Camaro | 2 DOOR CONVERTIBLE 1SS, 2 DOOR CONVERTIBLE 2SS, 2 DOOR CONVERTIBLE HIGH PERFORMANCE, 2 DOOR COUPE 1SS, 2 DOOR COUPE 2SS, 2 DOOR COUPE HIGH PERFORMANCE | 8 Cyl 6.2L
Less Info
View related parts
Chevrolet Camaro Fuel Pump Power Control Module Assembly
Part Number: 23382564
- Other Name: Module Assembly, Fuel Pump Power Control; Control Module, Fuel Pump Controller, Module
- Replaces: 23482909, 23199154
$65.65 MSRP: $137.93
You Save: $72.28 (53%)

Add to Cart
More Info
Fits the following Vehicles:
2016-2022 Chevrolet Camaro | 2 DOOR CONVERTIBLE 1LS/1LT, 2 DOOR CONVERTIBLE 1LT, 2 DOOR CONVERTIBLE 2LT, 2 DOOR COUPE 1LS/1LT, 2 DOOR COUPE 1LT, 2 DOOR COUPE 2LT | 6 Cyl 3.6L
Less Info
View related parts
Chevrolet Camaro Fuel Pump Flow Control Module Assembly
Part Number: 20867261
- Other Name: Module Assembly, Fuel Pump Flow Control; Control Module, Fuel Pump Controller, Module
More Info
Fits the following Vehicles:
2011-2012 Chevrolet Camaro | 2 DOOR CONVERTIBLE, 2 DOOR COUPE, LS 2 DOOR COUPE, LT 2 DOOR CONVERTIBLE, LT 2 DOOR COUPE, SS 2 DOOR CONVERTIBLE, SS 2 DOOR COUPE | 6 Cyl 3.6L, 8 Cyl 6.2L
Less Info

Chevrolet Camaro Fuel Pump Driver Module Parts Questions & Answers

Fuel Pump Flow Control Module Assembly
20867261
Q: How to remove and reinstall the fuel pump and fuel pump flow control module in a Chevrolet Camaro?
A: The vehicle has two fuel pump modules. The primary module includes the fuel pump, fuel level sender, and filter. The secondary module has a fuel level sender and fuel pick up. These parts can't be serviced separately. The Fuel Pump Driver Module (FPDM) regulates fuel pressure. To remove the primary module, relieve fuel pressure, disconnect the electrical connector and fuel line, rotate the locking ring counterclockwise, and pull the module out. Check and replace the O-ring if needed. The secondary module removal process is similar. The FPDM is behind the right-rear quarter trim panel. Access it by removing the rear seat and panel, disconnect the connector, and remove the mounting nut. Reinstall in reverse order.