How to replace a manually-operated or electrically-operated window regulator on Chevrolet Caprice?

To do a replacement of the manually-operated regulator, begin by removing the door trim panel and the water deflector. Lift the window as far up as it will go and then insert two rubber mencoes between the glass and the door panel. Third, unbolt and take out the regulator mounting bolts, and free the regulator lift arm from the lower sash guide plate cam, and pull the regulator out through the access opening. In the case of an electrically operated regulator, as with the manually operated one, you will need to first of all, release the window glass as explained above, then you will need to use a spanner to detach the bolts that hold the regulator to the car and to disconnect the regulator lift arm from the sash plate guide cam assembly. Then, with the aid of screw driver, unlock and take off the upper and lower guide tube mounting screws before pulling out the guide tube and the lower sash guide plate from the door. Last but not the least, remove the wiring harness and pull out the regulator assembly out of the way. Removal and installation of both types are the exact opposite of one another.

Genuine Chevrolet Caprice Window Regulator

Electric Power Window Regulator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Window Regulators found

View related parts
Chevrolet Caprice Rear Side Door Window Regulator Assembly
Part Number: 16631402
Product Specifications
- Other Name: Regulator Assembly, Rear Side Door Window; Regulator, Window Regulator
- Position: Rear
- Replaces: 16621634
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1996 Chevrolet Caprice | 4 DOOR, CLASSIC 4 DOOR, CLASSIC LS 4 DOOR, CLASSIC STATION WAGON, LS 4 DOOR, STATION WAGON | 6 Cyl 4.3L, 8 Cyl 4.3L, 8 Cyl 5.0L, 8 Cyl 5.7L
View related parts
Chevrolet Caprice Rear Side Door Window Regulator Assembly
Part Number: 16631405
Product Specifications
- Other Name: Regulator Assembly, Rear Side Door Window; Power Regulator, Regulator, Window Regulator
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1996 Chevrolet Caprice | 4 DOOR, CLASSIC 4 DOOR, CLASSIC LS 4 DOOR, CLASSIC STATION WAGON, LS 4 DOOR, STATION WAGON | 6 Cyl 4.3L, 8 Cyl 4.3L, 8 Cyl 5.0L, 8 Cyl 5.7L
View related parts
Chevrolet Caprice Rear Side Door Window Regulator Assembly
Part Number: 16631404
Product Specifications
- Other Name: Regulator Assembly, Rear Side Door Window; Power Regulator, Regulator, Window Regulator
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1996 Chevrolet Caprice | 4 DOOR, CLASSIC 4 DOOR, CLASSIC LS 4 DOOR, CLASSIC STATION WAGON, LS 4 DOOR, STATION WAGON | 6 Cyl 4.3L, 8 Cyl 4.3L, 8 Cyl 5.0L, 8 Cyl 5.7L
View related parts
Chevrolet Caprice Front Side Door Window Regulator Assembly
Part Number: 16621638
Product Specifications
- Other Name: Regulator Assembly, Front Side Door Window; Regulator, Window Regulator
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1996 Chevrolet Caprice | 4 DOOR, CLASSIC 4 DOOR, CLASSIC LS 4 DOOR, CLASSIC STATION WAGON, LS 4 DOOR, STATION WAGON | 6 Cyl 4.3L, 8 Cyl 4.3L, 8 Cyl 5.0L, 8 Cyl 5.7L
View related parts
Chevrolet Caprice Rear Side Door Window Regulator Assembly
Part Number: 16631403
Product Specifications
- Other Name: Regulator Assembly, Rear Side Door Window; Regulator, Window Regulator
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1996 Chevrolet Caprice | 4 DOOR, CLASSIC 4 DOOR, CLASSIC LS 4 DOOR, CLASSIC STATION WAGON, LS 4 DOOR, STATION WAGON | 6 Cyl 4.3L, 8 Cyl 4.3L, 8 Cyl 5.0L, 8 Cyl 5.7L
View related parts
Chevrolet Caprice Window Regulator ASSEMBLY
Part Number: 20005624
Product Specifications
- Other Name: Reg Asm; Regulator, Window Regulator
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1982-1990 Chevrolet Caprice | CLASSIC STATION WAGON, STATION WAGON | 6 Cyl 3.8L, 6 Cyl 4.3L, 8 Cyl 4.4L, 8 Cyl 5.0L, 8 Cyl 5.7L, 8 Cyl 5.7L Diesel

Chevrolet Caprice Window Regulator

This part is popularly known as motor or switch which is responsible for the up and down movement of the windows in the Chevrolet Caprice PEC because it makes the operation very easy for passengers. These regulators can be either electric motor driven or hand cranked depending on engine year and make of the Chevrolet Caprice. Chevrolet Caprice in the course of the years has used different Window Regulators, scissor type and cable type among them. The main difference between the two types is in its operation where there is a folding arm structure in scissor type and cable system in Cable type. Nonetheless, all of them are manufactured to the requirements of the original equipment manufacturer or OEM as to fit and operate like the factory original parts. Correcting issues with Window Regulators in a Chevrolet Caprice makes the vehicle's windows go up and down with ease thus making the vehicle more convenient to use.

Each OEM Chevrolet Caprice Window Regulator we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Chevrolet Caprice Window Regulator Parts Questions & Experts Answers

Window Regulator ASSEMBLY
20005624
Q: How to replace a manually-operated or electrically-operated window regulator on Chevrolet Caprice?
A: To do a replacement of the manually-operated regulator, begin by removing the door trim panel and the water deflector. Lift the window as far up as it will go and then insert two rubber mencoes between the glass and the door panel. Third, unbolt and take out the regulator mounting bolts, and free the regulator lift arm from the lower sash guide plate cam, and pull the regulator out through the access opening. In the case of an electrically operated regulator, as with the manually operated one, you will need to first of all, release the window glass as explained above, then you will need to use a spanner to detach the bolts that hold the regulator to the car and to disconnect the regulator lift arm from the sash plate guide cam assembly. Then, with the aid of screw driver, unlock and take off the upper and lower guide tube mounting screws before pulling out the guide tube and the lower sash guide plate from the door. Last but not the least, remove the wiring harness and pull out the regulator assembly out of the way. Removal and installation of both types are the exact opposite of one another.