How to remove a Compressor?

To remove the air conditioning system, start by discharging and recovering the system. Then, disconnect the battery cable and loosen the lug nuts on the right front wheel. Raise the vehicle and support it securely on jackstands before removing the wheel. Remove the inner fender splash shield and the drivebelt. For 2.0L supercharged models, drain the intercooler cooling system and remove the bolts securing the intercooler water pump. Disconnect the electrical connector from the compressor clutch field coil and, if necessary, the high-pressure sensor electrical connector. Disconnect the compressor inlet and outlet lines, removing the old O-rings. Finally, remove the compressor by taking out the mounting bolts. To install a new compressor, follow the manufacturer's instructions for measuring and adding new oil. The clutch may need to be transferred from the original compressor. Before reconnecting the inlet and outlet lines, replace the manifold O-rings and lubricate them with refrigerant oil. Then, reverse the removal steps. Once installed, have the system evacuated, recharged, and leak tested by a professional.

Genuine Chevrolet Cobalt A/C Compressor

Air Conditioning Compressor

Enter your vehicle info to find more parts and verify fitment

Select Vehicle by VIN
Select Vehicle by Model

Select by VIN

Enter your VIN for the most accurate results.

Select by Model

-- Select Make --

-- Select Model --

-- Select Year --

3 A/C Compressors found

View related parts
Chevrolet Cobalt Air Conditioner Compressor Kit
Part Number: 15893104
- Other Name: Compressor Kit, A/C; Compressor
- Replaces: 22729162
$328.92 MSRP: $598.04
You Save: $269.12 (46%)

Add to Cart
More Info
Fits the following Vehicles:
2005-2007 Chevrolet Cobalt | 2 DOOR, 4 DOOR, LEVEL 4 PERFORMANCE (SS) 2 DOOR, LEVEL 4 PERFORMANCE/SC (SS) 2 DOOR, LEVEL ONE (LS) 2 DOOR, LEVEL ONE (LS) 4 DOOR, LEVEL THREE (SS) 2 DOOR, LEVEL THREE (SS) 4 DOOR, LEVEL TWO (LT) 2 DOOR, LEVEL TWO (LT) 4 DOOR | 4 Cyl 2.0L
Less Info
View related parts
Chevrolet Cobalt Air Conditioner Compressor Kit
Part Number: 20772560
- Other Name: Compressor Kit, A/C; Compressor, Compressor Assembly
- Replaces: 25836142
$323.50 MSRP: $679.64
You Save: $356.14 (53%)

Add to Cart
More Info
Fits the following Vehicles:
2007-2010 Chevrolet Cobalt | 2 DOOR, 4 DOOR, LEVEL 4 PERFORMANCE/SC (SS) 2 DOOR, LEVEL 4 PERFORMANCE/SC (SS) 4 DOOR, LEVEL ONE (LS) 2 DOOR, LEVEL ONE (LS) 4 DOOR, LEVEL THREE (SS) 2 DOOR, LEVEL THREE (SS) 4 DOOR, LEVEL TWO (LT) 2 DOOR, LEVEL TWO (LT) 4 DOOR | 4 Cyl 2.2L, 4 Cyl 2.4L
Less Info
View related parts
Chevrolet Cobalt Air Conditioner Compressor Kit
Part Number: 15893103
- Other Name: Compressor Kit, A/C; Compressor, Compressor Assembly
- Replaces: 22688566, 22736034, 15255655
More Info
Fits the following Vehicles:
2005-2010 Chevrolet Cobalt | 2 DOOR, 4 DOOR, LEVEL 4 PERFORMANCE (SS) 2 DOOR, LEVEL 4 PERFORMANCE/SC (SS) 2 DOOR, LEVEL 4 PERFORMANCE/SC (SS) 4 DOOR, LEVEL ONE (LS) 2 DOOR, LEVEL ONE (LS) 4 DOOR, LEVEL THREE (SS) 2 DOOR, LEVEL THREE (SS) 4 DOOR, LEVEL TWO (LT) 2 DOOR, LEVEL TWO (LT) 4 DOOR | 4 Cyl 2.0L, 4 Cyl 2.2L, 4 Cyl 2.4L
Less Info

Chevrolet Cobalt A/C Compressor Parts Questions & Answers

Air Conditioner Compressor Kit
15893104
Q: How to remove a Compressor?
A: To remove the air conditioning system, start by discharging and recovering the system. Then, disconnect the battery cable and loosen the lug nuts on the right front wheel. Raise the vehicle and support it securely on jackstands before removing the wheel. Remove the inner fender splash shield and the drivebelt. For 2.0L supercharged models, drain the intercooler cooling system and remove the bolts securing the intercooler Water Pump. Disconnect the electrical connector from the compressor clutch field coil and, if necessary, the high-pressure sensor electrical connector. Disconnect the compressor inlet and outlet lines, removing the old O-rings. Finally, remove the compressor by taking out the mounting bolts. To install a new compressor, follow the manufacturer's instructions for measuring and adding new oil. The clutch may need to be transferred from the original compressor. Before reconnecting the inlet and outlet lines, replace the manifold O-rings and lubricate them with refrigerant oil. Then, reverse the removal steps. Once installed, have the system evacuated, recharged, and leak tested by a professional.