Genuine Chevrolet Equinox Automatic Transmission Shift Position Sensor Switch

AT Shift Position Sensor Switch
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Automatic Transmission Shift Position Sensor Switch found

  • View related parts
    Product Specifications
    • Other Name: SWITCH, Transmission Safety Start/Warning; Neutral Safety Switch
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    Fits the following Vehicles:
    • 2005-2006 Chevrolet Equinox | SUV AWD, SUV FWD, SUV LT AWD, SUV LT FWD | 6 Cyl 3.4L

Chevrolet Equinox Automatic Transmission Shift Position Sensor Switch

The Chevrolet Equinox Automatic Transmission Shift Position Sensor Switch is a safety gate that will only allow the starter to engage if the transmission is in neutral or park. The Automatic Transmission Shift Position Sensor Switch keeps track of the selector location. Moreover, it allows current to run to the ignition circuit only when the lever is in a safe position. Further, this blocks crank attempts that may create unwanted movement of the vehicle. The logic is straightforward yet effective and saves drivers and passengers each time the key is turned. The Automatic Transmission Shift Position Sensor Switch has always had that mission in the history of the model. Its packaging or connectors may have changed, but its job to verify park or neutral does not change. Since it forms part of the starting circuit, a faulty Automatic Transmission Shift Position Sensor Switch may prevent the engine from starting until the misinterpretation is corrected. As a result, such issues can impede reliable daily operation. Chevrolet crossover owners, such as those driving the Equinox, have this safeguard in place. The very fact that every Chevrolet Equinox has an Automatic Transmission Shift Position Sensor Switch goes to show how committed Chevrolet is to simple but effective safety technologies.

Each OEM Chevrolet Equinox Automatic Transmission Shift Position Sensor Switch we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Chevrolet Equinox Automatic Transmission Shift Position Sensor Switch Parts Questions & Experts Answers

  • Q: How to Remove and Install a Shift Lever and Automatic Transmission Shift Position Sensor Switch on Chevrolet Equinox?
    A:
    To remove the shift lever, start by placing the shift lever in Neutral and removing the battery, battery box, and tray. Then, carefully pry the end of the shift cable off of the ball stud on the Automatic Transmission Shift Position Sensor Switch using two screwdrivers. Disconnect the electrical connector from the switch and remove the control lever nut and lever. Finally, remove the mounting fasteners and lift off the switch. To install the new switch, ensure that the transaxle is in Neutral and align the flats on the switch with the flats on the shaft. Install the switch, leaving the mounting fasteners snug until you verify that the engine will only start in Park and Neutral. Install the lever and complete the rest of the installation in reverse order. Verify that the engine will only start in Park or Neutral and tighten the switch bolts securely.

Related Chevrolet Equinox Parts