How to remove and install the hood latch and Hood Cable on Chevrolet Equinox?

To open the hood, draw a line around the latch and bolt heads to help in aligning when reinstalling. For 2010 and newer models, insert a long handled trim tool or screw driver into the hood latch opening (below the plastic trim panel) and unplug the electrical connector fastener, then go behind under the radiator support and unplug it from there. The mounting bolts securing the hood latch to the radiator support should be removed. Take off the latch. To disconnect the Hood Cable, pull it out of the latch. To install remove is reverse. In work within passenger compartment, free cable from retainer and slide end of out handle (pull cable from retainer then slide end of handle). Disconnect Hood Cable at latch while working in engine compartment. Unclip all cable retaining clips on radiator support and inner fenderwell. Front bumper cover must be removed on 2010 and later models for access to cable retaining clips. To install remove is reverse.

Genuine Chevrolet Equinox Hood Cable

Hood Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Hood Cables found

View related parts
Chevrolet Equinox Cable Assembly, Hood Primary Latch Release *Jet Black
Part Number: 20861493
$52.08 MSRP: $77.87
You Save: $25.79 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: CABLE, Hood Latch; Release Cable
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2017 Chevrolet Equinox | LS SUV, LT SUV, LTZ SUV | 4 Cyl 2.4L, 6 Cyl 3.0L, 6 Cyl 3.6L
View related parts
Chevrolet Equinox Hood Primary Latch Release Cable Assembly Black
Part Number: 84200619
$37.72 MSRP: $57.16
You Save: $19.44 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Hood Prim Lat Rel *Black; Release Cable
- Replaced by: 85610501
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2024 Chevrolet Equinox | 4 DOOR BASE , 4 DOOR LT , 4 DOOR LTZ | 4 Cyl 1.5L, 4 Cyl 1.6L Diesel, 4 Cyl 2.0L
View related parts
Chevrolet Equinox Hood Primary Latch Release Cable Assembly
Part Number: 15291964
Product Specifications
- Other Name: CABLE, Hood Latch; Release Cable
- Replaces: 22727899
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2009 Chevrolet Equinox | SS SUV AWD, SS SUV FWD, SUV AWD, SUV FWD, SUV LT AWD, SUV LT FWD | 6 Cyl 3.4L, 6 Cyl 3.6L

Chevrolet Equinox Hood Cable

Chevrolet Equinox Hood Cable lets drivers pop the hood with a quick tug, giving fast access to the engine bay for routine checks and repairs. The Hood Cable links the interior release handle to the latch assembly, so when the lever is pulled the inner wire slides and frees the latch, allowing the hood to lift. Major models use a primary wire running from the cabin to a junction near the grille and secondary lines that reach each latch, a straightforward push pull system that balances strength with flexibility. Earlier and later versions retain this same basic design, so there are no confusing style changes, yet all share the same weak point, the steel core can stretch or snap and its outer housing can crack over time, letting water sneak in and speed up corrosion. A lever that feels slack or a hood that refuses to open warns that the Hood Cable is failing. Replacing a worn Hood Cable restores reliable operation and keeps every Chevrolet SUV task simple because an intact Hood Cable is the small part that keeps every Equinox service step within easy reach for every Chevrolet Equinox owner.

Each OEM Chevrolet Equinox Hood Cable we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Chevrolet Equinox Hood Cable Parts Questions & Experts Answers

Cable Assembly, Hood Primary Latch Release *Jet Black
20861493
Q: How to remove and install the hood latch and Hood Cable on Chevrolet Equinox?
A:
To open the hood, draw a line around the latch and bolt heads to help in aligning when reinstalling. For 2010 and newer models, insert a long handled trim tool or screw driver into the hood latch opening (below the plastic trim panel) and unplug the electrical connector fastener, then go behind under the radiator support and unplug it from there. The mounting bolts securing the hood latch to the radiator support should be removed. Take off the latch. To disconnect the Hood Cable, pull it out of the latch. To install remove is reverse. In work within passenger compartment, free cable from retainer and slide end of out handle (pull cable from retainer then slide end of handle). Disconnect Hood Cable at latch while working in engine compartment. Unclip all cable retaining clips on radiator support and inner fenderwell. Front Bumper cover must be removed on 2010 and later models for access to cable retaining clips. To install remove is reverse.

Genuine Chevrolet Equinox Hood Cable

3 Hood Cables found

Chevrolet Equinox Cable Assembly, Hood Primary Latch Release *Jet Black

Chevrolet Equinox Hood Primary Latch Release Cable Assembly Black

Chevrolet Equinox Hood Primary Latch Release Cable Assembly

Chevrolet Equinox Hood Cable

Chevrolet Equinox Hood Cable Parts Questions & Experts Answers

Related Chevrolet Equinox Parts

Browse by Year