How to remove the Canister Purge Valves and Vapor Canister on Chevrolet HHR?

To remove the EVAP canister purge solenoid, turn off the ignition and locate the solenoid. Disconnect the electrical connector and purge line fittings, and cap the lines. Remove the mounting bracket bolt and separate the solenoid. For the vent solenoid, raise the vehicle's rear and disconnect the electrical connector. Remove the mounting bolt, lower the canister, and rotate the solenoid counterclockwise to remove. To remove the EVAP canister, disconnect the hoses. For the fuel tank pressure sensor, raise the vehicle, remove the fuel tank, and disconnect the sensor's electrical connector. Pry under the sensor to remove it. Installation is the reverse of removal.

Genuine Chevrolet HHR Canister Purge Valves

Fuel Tank Evaporator Purge Control Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Canister Purge Valves found

View related parts
Chevrolet HHR Evap Emission Canister Purge Solenoid Valve Assembly
Part Number: 12597567
$33.14 MSRP: $67.60
You Save: $34.46 (51%)
ADD TO CART
Product Specifications
- Other Name: VALVE, Fuel Tank Evaporator/Purge Control
- Replaced by: 12735397
- Replaces: 12606684, 12597566, 12570469, 12597341
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2011 Chevrolet HHR | 5 DOOR HIGH ROOF HATCHBACK, 5 DOOR HIGH ROOF HATCHBACK SS, 5 DOOR HIGH ROOF PANEL, 5 DOOR HIGH ROOF PANEL SS, 5 DOOR UPLEVEL HIGH ROOF HATCHBACK, 5 DOOR UPLEVEL HIGH ROOF PANEL | 4 Cyl 2.2L, 4 Cyl 2.2L Flex, 4 Cyl 2.4L
View related parts
Chevrolet HHR Valve,Evap Emission Canister Vent Solenoid
Part Number: 20880503
$33.52 MSRP: $63.24
You Save: $29.72 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: VALVE, Fuel Tank Evaporator/Purge Control; Solenoid, Vent Control Solenoid
- Replaces: 22728657, 25932567
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2011 Chevrolet HHR | 5 DOOR HIGH ROOF HATCHBACK, 5 DOOR HIGH ROOF HATCHBACK SS, 5 DOOR HIGH ROOF PANEL, 5 DOOR HIGH ROOF PANEL SS, 5 DOOR UPLEVEL HIGH ROOF HATCHBACK, 5 DOOR UPLEVEL HIGH ROOF PANEL | 4 Cyl 2.0L, 4 Cyl 2.2L, 4 Cyl 2.2L Flex, 4 Cyl 2.4L
View related parts
Chevrolet HHR Evap Emission Canister Purge Solenoid Valve Assembly
Part Number: 12592015
$31.69 MSRP: $59.80
You Save: $28.11 (48%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: VALVE, Fuel Tank Evaporator/Purge Control
- Replaced by: 12735400
- Replaces: 12608378
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2010 Chevrolet HHR | 5 DOOR HIGH ROOF HATCHBACK SS, 5 DOOR HIGH ROOF PANEL SS | 4 Cyl 2.0L

Chevrolet HHR Canister Purge Valves

Chevrolet HHR Canister Purge Valves are strategic components that ensure the fuel vapors don't go to waste. They expertly route vapors from the charcoal canister to the engine for burning. As a result, they prevent the vapors from escaping. Ultimately, it lowers smog-forming hydrocarbons and maintains mileage. Located in the space between the canister and intake manifold, these Canister Purge Valves open in the presence of engine vacuum, pulling fresh air through the charcoal bed. This enables stored vapors to mix inside the air-fuel charge and combust cleanly. Early systems applied simple vacuum-controlled versions that opened and closed. These replaced vented fuel caps of pre-1970s designs. Later OBD II vehicles saw the fitment of electronically driven Canister Purge Valves. These work in conjunction with a vent solenoid and tank pressure sensor. This system allows the engine computer to seal the system for leak checks. If vacuum levels fall short, the computer sets an alert light. Although the equipment now has more electronics, it does the same job as always. The new style mainly differs in providing accurate timing and self-diagnostics that keep emissions within legal limits. A properly tightened fuel cap allows the Canister Purge Valves on every Chevrolet HHR to perform optimally so that every Chevrolet can be as efficient and environmentally responsible as possible on daily HHR trips. Additionally, the Canister Purge Valves play a crucial role in maintaining the overall performance of the vehicle.

Each OEM Chevrolet HHR Canister Purge Valves we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Chevrolet HHR Canister Purge Valves Parts Questions & Experts Answers

Valve,Evap Emission Canister Vent Solenoid
20880503
Q: How to remove the Canister Purge Valves and Vapor Canister on Chevrolet HHR?
A:
To remove the EVAP canister purge solenoid, turn off the ignition and locate the solenoid. Disconnect the electrical connector and purge line fittings, and cap the lines. Remove the mounting bracket bolt and separate the solenoid. For the vent solenoid, raise the vehicle's rear and disconnect the electrical connector. Remove the mounting bolt, lower the canister, and rotate the solenoid counterclockwise to remove. To remove the EVAP canister, disconnect the hoses. For the fuel tank pressure sensor, raise the vehicle, remove the fuel tank, and disconnect the sensor's electrical connector. Pry under the sensor to remove it. Installation is the reverse of removal.