My Garage
My Account
Cart
Genuine Chevrolet Monte Carlo Bumper
Bumper Fascia- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
27 Bumpers found
Chevrolet Monte Carlo Front Bumper, Cover (Primed, Base Level) *Paint To Mat
Part Number: 12335505$194.11 MSRP: $305.26You Save: $111.15 (37%)
Chevrolet Monte Carlo Bumper Fascia, Front
Part Number: 88954941$530.90 MSRP: $795.16You Save: $264.26 (34%)Ships in 1-3 Business DaysChevrolet Monte Carlo Front Bumper Cover (Primed)
Part Number: 10442543$132.92 MSRP: $198.19You Save: $65.27 (33%)Ships in 1-3 Business Days
Chevrolet Monte Carlo Front Primered Bumper Cover
Part Number: 89025784$445.62 MSRP: $667.43You Save: $221.81 (34%)Ships in 1-3 Business DaysChevrolet Monte Carlo Front Bumper Cover (Primed, Ruff Rubber Strip Area)
Part Number: 12335938$116.78 MSRP: $734.61You Save: $617.83 (85%)Ships in 1-2 Business Days
Chevrolet Monte Carlo Cover Front Bumper
Part Number: 16502362$376.06 MSRP: $563.25You Save: $187.19 (34%)Chevrolet Monte Carlo Front Bumper, Cover *Primed
Part Number: 12335836$277.16 MSRP: $415.12You Save: $137.96 (34%)
Chevrolet Monte Carlo Rear Bumper, Cover *Primed
Part Number: 89025785$73.41 MSRP: $108.00You Save: $34.59 (33%)Chevrolet Monte Carlo Rear Bumper Cover *Primed (Dual Exhaust)*Primed
Part Number: 89025786$168.42 MSRP: $251.12You Save: $82.70 (33%)
| Page 1 of 2 |Next >
1-20 of 27 Results
Chevrolet Monte Carlo Bumper
The Chevrolet Monte Carlo Bumper, being the first component to absorb a low-speed impact, protects the lights and sheet metal from costly damage. The original versions of the Monte Carlo featured uncomplicated chrome-plated steel beams that protruded from the body, similar to those found on many classic Chevrolet coupes. Back then, a Bumper was little more than a rigid bar. As fashion trends moved the Bumper inwards, the depression streamlined the car but compromised some protection. This was corrected in the 1970s when federal 5-mph regulations required larger projecting Bumper units that reinstated impact energy control. Recent designs consist of a plastic outer layer over a reinforced bar with foam or honeycomb inserts, so the Bumper can redistribute force while merging smoothly with the coupe's lines. There are new material choices such as aluminum, which lightens the load, or carbon or stainless steel, which offers strength and rust resistance. These alter the weight, cost, and corrosion profile of the Monte Carlo, though the Bumper continues to offer core safety mission. This is true of every Chevrolet generation.
Each OEM Chevrolet Monte Carlo Bumper we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.
Chevrolet Monte Carlo Bumper Parts Questions & Experts Answers
- Q: How to remove and reinstall the front and rear bumper covers on Chevrolet Monte Carlo?A:The front bumper cover, like most automotive accessories, is designed to be removed and put back on as needed; to achieve this here's how to do it Take off the upper fasteners After doing this, find a suitable ground, lift the vehicle, and place it on suitable jackstands. Then, to perform this procedure, you have to take off the engine splash and the inner fender splash shields. Following that, remove the corner bumper cover retaining fasteners and with the help of a partner pull the bumper cover forward and upward. Again you require to lift the vehicle and support it on jackstands for the repair of rear bumper cover. Remove and loosen the nuts at the rear lower bumper bar, the bottom of the bumper cover, then go to the rear wheel opening and undo the screws to pull apart the liner to reveal the corner mounting bolt. Lift the rear of the bumper cover to gain access to the upper edge of the bumper and care fully unscrew the bolts with the help of screw driver and pull it out with the help of any extra hand tool. Reinstallation is done in the sequence of its removal being done in the reverse order.
