Turn the ignition key to the On position, depress the brake pedal, then place the shifter in the drive position. Disconnect the cable from the negative battery terminal. Remove the center console shift lever trim panel by carefully prying it off with a trim stick. Remove the console retaining screws by taking out the fasteners at the front of the console, opening the lid to the console bin, and removing the mat before taking out the four fasteners. Carefully lift the console up and over the shifter, disconnect any electrical connectors, then remove it from the vehicle. Installation is the reverse of removal. Move the shift lever back into the Park position, turn the ignition key to off, then reconnect the cable to the negative terminal of the battery.