How to remove and reinstall the Flywheel in V6 engine on Chevrolet Monte Carlo?

To remove the transaxle, first raise the vehicle and support it securely on jackstands. Next, remove the bolts securing the driveplate to the crankshaft, noting that most driveplates have locating dowels; if yours does not, make marks for proper alignment during reassembly. If the crankshaft turns, use a screwdriver to jam the driveplate by wedging it in the ring gear teeth, or use a large screwdriver in one of the driveplate holes to prevent it from turning while removing the bolts. Be aware of any retaining ring between the bolts and the driveplate, and note which side faces the driveplate upon removal. Carefully take off the driveplate while wearing gloves to protect your fingers from sharp edges. Clean the driveplate to remove grease and oil, inspecting it for cracks and checking for any damaged ring gear teeth, laying it on a flat surface to check for warpage. Clean and inspect the mating surfaces of the driveplate and crankshaft, replacing the crankshaft rear seal if it is leaking before reinstalling the driveplate. For installation, position the driveplate against the crankshaft, aligning it with the marks made during removal, and ensure correct installation using any alignment dowels or staggered bolt holes present. Apply thread locking compound to the bolt threads and place the retaining ring on the driveplate before tightening the bolts. Use a screwdriver to keep the driveplate from turning while torquing the bolts, and consider replacing the front pump seal/O-ring if it is leaking. The remaining steps for installation follow the reverse order of removal.

Genuine Chevrolet Monte Carlo Flywheel

Clutch Flywheel

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Flywheels found

View related parts
Chevrolet Monte Carlo Engine Crankshaft FLYWHEEL
Part Number: 14088765
$121.79 MSRP: $210.09
You Save: $88.30 (43%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Flywheel, Engine Crankshaft; Drive Plate
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1987-1988 Chevrolet Monte Carlo | EL CAMINO, MONTE CARLO | 8 Cyl 5.0L
View related parts
Chevrolet Monte Carlo Engine Crankshaft FLYWHEEL
Part Number: 471529
$140.65 MSRP: $166.69
You Save: $26.04 (16%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Flywheel, Engine Crankshaft; Drive Plate
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1982-1986 Chevrolet Monte Carlo | CLASSIC 4 DOOR, CLASSIC STATION WAGON, EL CAMINO, MONTE CARLO | 6 Cyl 3.8L, 8 Cyl 4.4L, 8 Cyl 5.0L
View related parts
Chevrolet Monte Carlo Flywheel Assembly
Part Number: 12579453
$104.31 MSRP: $164.11
You Save: $59.80 (37%)
Product Specifications
- Other Name: Flywheel Asm; Drive Plate, Flywheel
- Replaces: 10218513, 24576876, 24506847
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2007 Chevrolet Monte Carlo | IMPALA, LS, LS 4 DOOR, LT, LTZ, LTZ 4 DOOR, LUMINA, MONTE CARLO, POLICE CAR, SS, Z34 | 6 Cyl 3.1L, 6 Cyl 3.4L, 6 Cyl 3.5L, 6 Cyl 3.5L Flex, 6 Cyl 3.9L
View related parts
Chevrolet Monte Carlo Engine Crankshaft FLYWHEEL
Part Number: 12609155
$52.23 MSRP: $82.19
You Save: $29.96 (37%)
Product Specifications
- Other Name: Flywheel Asm ; Flywheel, Engine Crankshaft; Drive Plate, Flywheel
- Replaces: 24508110, 24505212
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2005 Chevrolet Monte Carlo | IMPALA, LS, LT, LTZ, LUMINA, POLICE CAR, SS, Z34 | 6 Cyl 3.8L
View related parts
Chevrolet Monte Carlo Automatic Transmission Flexible Plate Assembly
Part Number: 12568922
Product Specifications
- Other Name: Plate Assembly, Automatic Transmission Flexible ; Plate, Engine Crankshaft; Drive Plate
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2007 Chevrolet Monte Carlo | LS, LT, SS | 8 Cyl 5.3L
View related parts
Chevrolet Monte Carlo Engine Crankshaft FLYWHEEL
Part Number: 12609154
Product Specifications
- Other Name: Flywheel Asm ; Flywheel, Engine Crankshaft; Drive Plate, Flywheel
- Replaces: 24506809
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2005 Chevrolet Monte Carlo | IMPALA, LS, LT, POLICE CAR, SS | 6 Cyl 3.8L
View related parts
Chevrolet Monte Carlo Flywheel & Ring Gear Assembly
Part Number: 25512348
Product Specifications
- Other Name: Gear Assembly, Flywheel & Ring Gear; Drive Plate
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1982-1985 Chevrolet Monte Carlo | CLASSIC 4 DOOR, CLASSIC STATION WAGON, EL CAMINO, MONTE CARLO | 6 Cyl 3.8L
View related parts
Chevrolet Monte Carlo Flywheel
Part Number: 22500808
Product Specifications
- Other Name: Drive Plate
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1982-1983 Chevrolet Monte Carlo | CLASSIC 4 DOOR, CLASSIC STATION WAGON, EL CAMINO, MONTE CARLO | 8 Cyl 5.7L Diesel
View related parts
Chevrolet Monte Carlo Engine Crankshaft FLYWHEEL
Part Number: 22500807
Product Specifications
- Other Name: Flywheel Assembly, Crankshaft ; Flywheel, Engine Crankshaft; Drive Plate
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1986-1987 Chevrolet Monte Carlo | EL CAMINO, MONTE CARLO

Chevrolet Monte Carlo Flywheel

Each OEM Chevrolet Monte Carlo Flywheel we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Chevrolet Monte Carlo Flywheel Parts Questions & Experts Answers

Flywheel Assembly
12579453
Q: How to remove and reinstall the Flywheel in V6 engine on Chevrolet Monte Carlo?
A: To remove the transaxle, first raise the vehicle and support it securely on jackstands. Next, remove the bolts securing the driveplate to the crankshaft, noting that most driveplates have locating dowels; if yours does not, make marks for proper alignment during reassembly. If the crankshaft turns, use a screwdriver to jam the driveplate by wedging it in the ring gear teeth, or use a large screwdriver in one of the driveplate holes to prevent it from turning while removing the bolts. Be aware of any retaining ring between the bolts and the driveplate, and note which side faces the driveplate upon removal. Carefully take off the driveplate while wearing gloves to protect your fingers from sharp edges. Clean the driveplate to remove grease and oil, inspecting it for cracks and checking for any damaged ring gear teeth, laying it on a flat surface to check for warpage. Clean and inspect the mating surfaces of the driveplate and crankshaft, replacing the crankshaft rear seal if it is leaking before reinstalling the driveplate. For installation, position the driveplate against the crankshaft, aligning it with the marks made during removal, and ensure correct installation using any alignment dowels or staggered bolt holes present. Apply thread locking compound to the bolt threads and place the retaining ring on the driveplate before tightening the bolts. Use a screwdriver to keep the driveplate from turning while torquing the bolts, and consider replacing the front pump seal/O-ring if it is leaking. The remaining steps for installation follow the reverse order of removal.