To start, disconnect the negative battery cable, then remove the cover from under the steering column, and take off the wheel itself. Unfasten the two Torx-head bolts below the dash to lower the steering column. After that, unscrew the ones connecting the switch to the column. Look for the connector under the dashboard, disconnect the switch wires on it, take off the whole switch frame, and make a record of how this single switch controls the blinkers, dimmers, and windshield wipers and washers. To center the airbag coil in vehicles with airbags, steer straight with your front wheels pointed forward, carefully rotate the coil hub counter-clockwise while watching its progress, and stop when it hits its lock. Then turn the hub clockwise two full turns until red arrows on the coil match their positions on the coil body. Following the removal instructions backward brings you through the installation process.