How do you remove the vacuum pump?

To remove the vacuum pump, start by turning the ignition switch to OFF and pumping the brake pedal several times to deplete any remaining vacuum. Then, remove the engine cover to access the vacuum pump located at the left front corner of the engine compartment. Disconnect the vacuum hose by releasing the quick connect filling and position the power brake booster vacuum hose to the side. Disconnect the electrical connector and, if necessary, release the wiring from the bracket. Remove the nuts and pull the pump from the engine compartment, or remove the bolts from the pump bracket if needed. Retain the rubber mounting bushings and their sleeves. To install the vacuum pump, reverse the removal steps. If the replacement pump does not include rubber mounting bushings, transfer them from the old pump. Ensure the fasteners are tightened securely and check for proper operation of the brake booster system.

Genuine Chevrolet Traverse Vacuum Pump

Vacuum Pressure Pump

Enter your vehicle info to find more parts and verify fitment

Select Vehicle by VIN
Select Vehicle by Model

Select by VIN

Enter your VIN for the most accurate results.

Select by Model

-- Select Make --

-- Select Model --

-- Select Year --

3 Vacuum Pumps found

View related parts
Chevrolet Traverse Pump Assembly, Vac
Part Number: 12686657
- Other Name: Air Injection Reactor Pump, Pump, Vacuum Pump
- Replaces: 12662773, 12654111, 12660670, 25202882, 12686655, 12658172, 12673081
$75.34 MSRP: $156.44
You Save: $81.10 (52%)

Add to Cart
More Info
Fits the following Vehicles:
2018-2019 Chevrolet Traverse | LT EXTENDED 4 DOOR SUV | 4 Cyl 2.0L
Less Info
View related parts
Chevrolet Traverse Pump Assembly, Power Brake Booster Auxiliary
Part Number: 22819443
- Other Name: PUMP, Vacuum Power Brake Pump; Auxiliary Pump
- Replaced by: 86517948
- Replaces: 20803252, 25908670
$147.32 MSRP: $299.59
You Save: $152.27 (51%)

Add to Cart
More Info
Fits the following Vehicles:
2009-2017 Chevrolet Traverse | SPORT UTILITY VEHICLE 2WD, SPORT UTILITY VEHICLE 4WD, SPORT UTILITY VEHICLE AWD | 6 Cyl 3.6L
Less Info
View related parts
Chevrolet Traverse Pump Assembly, P/B Boos
Part Number: 84789032
- Other Name: Pump, Vacuum Pump
- Replaced by: 85587887
$166.69 MSRP: $300.34
You Save: $133.65 (45%)

Add to Cart
More Info
Fits the following Vehicles:
2018-2021 Chevrolet Traverse | LS EXTENDED 4 DOOR SUV, LT EXTENDED 4 DOOR SUV, LTZ EXTENDED 4 DOOR SUV | 6 Cyl 3.6L
Less Info

Chevrolet Traverse Vacuum Pump Parts Questions & Answers

Pump Assembly, Power Brake Booster Auxiliary
22819443
Q: How do you remove the vacuum pump?
A: To remove the vacuum pump, start by turning the ignition switch to OFF and pumping the brake pedal several times to deplete any remaining vacuum. Then, remove the engine cover to access the vacuum pump located at the left front corner of the engine compartment. Disconnect the vacuum hose by releasing the quick connect filling and position the power brake booster vacuum hose to the side. Disconnect the electrical connector and, if necessary, release the wiring from the bracket. Remove the nuts and pull the pump from the engine compartment, or remove the bolts from the pump bracket if needed. Retain the rubber mounting bushings and their sleeves. To install the vacuum pump, reverse the removal steps. If the replacement pump does not include rubber mounting bushings, transfer them from the old pump. Ensure the fasteners are tightened securely and check for proper operation of the brake booster system.