How to remove and install the actuator in a Chevrolet Colorado and GMC Canyon?

Securely raise the front of the vehicle and support it using jack stands. The splash shield is taken off. Pull out the electrical connector from the actuator. Separate actuator mounting bolts and disengage actuator from intermediate shaft housing. To fix an actuator, apply reverse removal procedure. Torque down bolts to specs as indicated above.

Genuine GMC Canyon 4WD Actuator

Four-Wheel Drive Actuator

Enter your vehicle info to find more parts and verify fitment

Select Vehicle by VIN
Select Vehicle by Model

Select by VIN

Enter your VIN for the most accurate results.

Select by Model

-- Select Make --

-- Select Model --

-- Select Year --

2 4WD Actuators found

View related parts
GMC Canyon Actuator,Front Drive Axle
Part Number: 26060073
- Other Name: ACTUATOR, Front Drive Axle Shifter/Lock; Actuator, Switch, Switch Actuator
- Position: Front
$138.82 MSRP: $241.60
You Save: $102.78 (43%)

Add to Cart
More Info
Fits the following Vehicles:
2004-2012 GMC Canyon | PICKUP, PICKUP CREW CAB, PICKUP EXTENDED CAB, PICKUP EXTENDED LENGTH | 4 Cyl 2.8L, 4 Cyl 2.9L, 5 Cyl 3.5L, 5 Cyl 3.7L, 8 Cyl 5.3L
Less Info
View related parts
GMC Canyon Actuator Assembly, Front Drv Axle
Part Number: 84630666
- Position: Front
- Replaces: 84085349
$222.06 MSRP: $350.96
You Save: $128.90 (37%)

Add to Cart
More Info
Fits the following Vehicles:
2015-2021 GMC Canyon | CREW CAB - 5'2" BOX, CREW CAB - 6'2" BOX, CREW CAB SLE - 6'2" BOX, CREW CAB SLT - 6'2" BOX, EXTENDED CAB - 6'2" BOX, SLE CREW CAB - 5'2" BOX, SLE EXTENDED CAB - 6'2" BOX, SLT CREW CAB - 5'2" BOX, SLT EXTENDED CAB - 6'2" BOX | 4 Cyl 2.5L, 4 Cyl 2.8L Diesel, 6 Cyl 3.6L
Less Info

GMC Canyon 4WD Actuator Parts Questions & Answers

Actuator,Front Drive Axle
26060073
Q: How to remove and install the actuator in a Chevrolet Colorado and GMC Canyon?
A: Securely raise the front of the vehicle and support it using jack stands. The splash shield is taken off. Pull out the electrical connector from the actuator. Separate actuator mounting bolts and disengage actuator from intermediate shaft housing. To fix an actuator, apply reverse removal procedure. Torque down bolts to specs as indicated above.