Genuine Pontiac 6000 Camshaft Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Camshaft Bearings found

View related parts
Pontiac 6000 Camshaft Bearing
Part Number: 12507947
$1.98 MSRP: $3.16
You Save: $1.18 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: BEARING, Engine Camshaft & Balance Shaft Front; Bearing, Bearing Set, Camshaft Bearing
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1987-1991 Pontiac 6000 | 2 DOOR, 4 DOOR, LE 4 DOOR, LE STATION WAGON, SE 4 DOOR, SE STATION WAGON, STATION WAGON, STE 4 DOOR | 6 Cyl 2.8L, 6 Cyl 3.1L
View related parts
Pontiac 6000 Camshaft Bearing
Part Number: 14002525
$1.04 MSRP: $1.71
You Save: $0.67 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: BEARING, Engine Camshaft & Balance Shaft Front; Bearing, Camshaft Bearing
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1982-1991 Pontiac 6000 | 2 DOOR, 4 DOOR, LE 2 DOOR, LE 4 DOOR, LE STATION WAGON, SE 4 DOOR, SE STATION WAGON, STATION WAGON, STE 2 DOOR, STE 4 DOOR | 4 Cyl 2.5L
View related parts
Pontiac 6000 Camshaft Bearing
Part Number: 12507946
$2.10 MSRP: $3.29
You Save: $1.19 (37%)
Product Specifications
- Other Name: BEARING, Engine Camshaft & Balance Shaft Front; Bearing, Bearing Set, Camshaft Bearing
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1987-1991 Pontiac 6000 | 2 DOOR, 4 DOOR, LE 4 DOOR, LE STATION WAGON, SE 4 DOOR, SE STATION WAGON, STATION WAGON, STE 4 DOOR | 6 Cyl 2.8L, 6 Cyl 3.1L
View related parts
Pontiac 6000 Bearing, Camshaft #1
Part Number: 12507945
Product Specifications
- Other Name: BEARING, Engine Camshaft & Balance Shaft Front; Bearing, Camshaft Bearing
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1982-1991 Pontiac 6000 | 2 DOOR, 4 DOOR, LE 2 DOOR, LE 4 DOOR, LE STATION WAGON, SE 4 DOOR, SE STATION WAGON, STATION WAGON, STE 2 DOOR, STE 4 DOOR | 6 Cyl 2.8L, 6 Cyl 3.1L

Pontiac 6000 Camshaft Bearing

Pontiac 6000 Camshaft Bearing delivers consistent low friction support that keeps valve timing razor sharp and engine confidence high. Built as a sturdy plain bearing, each Camshaft Bearing presses into the finely machined block bores and rides on a film of pressurized oil that shields metal from wear. Whether the car is a first year Pontiac 6000 commuter or a later performance trim, the Camshaft Bearing stays central to smooth revs by preserving the tiny clearance that allows free rotation. The bi metal aluminum alloy version offers lightweight strength, while the tri metal copper layered Camshaft Bearing stands ready for higher loads, giving drivers the option that suits spirited or daily use in any 6000 without sacrificing reliability. Special silicone hardening lets the Camshaft Bearing shrug off seizure risk, an edge that sets it apart from many rivals in the crowded parts market. Exact oil hole alignment and proper crush lock the Camshaft Bearing in place, so the mid engine layout can exploit every bit of its space frame agility with quiet confidence. Because the part safeguards precise cam location, fuel burn stays clean, emissions stay low, and temperature control remains steady, translating into better mileage and longer catalyst life. Safety also benefits, since mis timed valves can spell sudden power loss at highway speed, a scenario this resilient Camshaft Bearing helps prevent. Every Pontiac powerplant built for the 6000 gains a measurable edge in throttle response once a fresh Camshaft Bearing is installed, and classic car fans trust the piece because it honors factory specifications. From Detroit streets to highways, Pontiac owners report that their 6000 stays quiet even at high rpm thanks to the bearing surface. Choosing genuine Pontiac quality gives peace of mind for long cross country drives, letting the Pontiac 6000 legend continue mile after mile.

Each OEM Pontiac 6000 Camshaft Bearing we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.