Genuine Pontiac 6000 Exhaust Manifold Clamp

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Exhaust Manifold Clamp found

View related parts
Pontiac 6000 Clamp Assembly, Catalytic Converter (60 Outside Diameter Pipe)
Part Number: 15595206
Product Specifications
- Other Name: CLAMP, Exhaust System Attaching
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-1991 Pontiac 6000 | LE 4 DOOR, LE STATION WAGON, SE STATION WAGON | 6 Cyl 3.1L

Pontiac 6000 Exhaust Manifold Clamp

The Pontiac 6000 Exhaust Manifold Clamp keeps hot exhaust contained at the junction of the pipe and the manifold, offering reliable service mile after mile while safeguarding engine efficiency and cabin air quality. This small part is a big deal among enthusiasts. The second Exhaust Manifold Clamp in the system has a threaded fastener to allow quick swaps when the surface wears. The third Exhaust Manifold Clamp is made with heat-resistant steel to prevent warping and vibration, allowing for smooth acceleration and accurate fuel sensor readings. A fourth Exhaust Manifold Clamp allows for flex with each throttle blip, stopping the cracks rigid welds can get from everyday stress. The fifth Exhaust Manifold Clamp comes with various diameters for owners to match the exact location from the downpipe or further down the run. A sixth Exhaust Manifold Clamp only costs low yet it saves drivers from replacing whole sections so budgets and emissions can stay in check. Any Pontiac driver who has a 6000 sedan, fastback, or notchback depends on the clamp in the car to prevent power loss and to block fumes from getting into the cockpit. Among the 1984, 1986, and 1988 6000 lineups, the exhaust routing was kept the same at Pontiac so the clamp goes in without headache and does not require any extra adapters. The device locks gases within the manifold, which helps the 6000 conserve fuel and keeps Pontiac passengers inhaling clean air. This provides the 6000 with safety credit. Pontiac owners report a quieter, cooler 6000 season after season because of this tough link. A seventh Pontiac Exhaust Manifold Clamp and an eighth 6000 version provide complete compatibility for any restoration or performance upgrade.

Each OEM Pontiac 6000 Exhaust Manifold Clamp we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.