My Garage
My Account
Cart
Genuine Pontiac Vibe Throttle Cable
Accelerator Throttle Cable- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
5 Throttle Cables found
Pontiac Vibe Accelerator Control Cable
Part Number: 88970525$4.95 MSRP: $30.41You Save: $25.46 (84%)Ships in 1-2 Business Days
Pontiac Vibe Throttle Cable
The Pontiac Vibe Throttle Cable connects the gas pedal and throttle plate, converting pressure on the pedal into airflow entering the engine so acceleration feels direct and predictable. The braided steel Throttle Cable runs from the cabin to the throttle body housing. The driver pressing the pedal pulls a butterfly valve open. At the same time, the powertrain control module makes an adjustment to the injector pulse to keep fuel delivery balanced. The original model years of the Pontiac Vibe made use of this mechanical Throttle Cable, which offers driver simplicity and response. As the technology evolved, many Pontiac models later on applied electronic throttle control. It replaces the physical Throttle Cable with sensors and a small motor. Moreover, it integrates the functions of traction and stability. It does away with the possibility of a stuck throttle or binding. The main differentiating factor is that, while a classic Throttle Cable uses pure mechanical motion, the drive-by-wire arrangement uses electrical signals and an actuator to move the same throttle plate. The original setup has a simplistic design that appeals to owners who enjoy a crisp pedal feel, whereas newer Vibe variants feature electronics and safety.
Each OEM Pontiac Vibe Throttle Cable we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.
Pontiac Vibe Throttle Cable Parts Questions & Experts Answers
- Q: How to remove and install a throttle cable on Pontiac Vibe?A:2005 and later models use an electric motor for the throttle, controlled by the PCM, replacing the throttle cable. 2003 and 2004 models with cruise control have two throttle cables. To remove, disconnect the battery cable, remove the cruise control actuator cover, loosen the throttle cable locknut, and detach the cable from the pedal. Remove the cable retainer bolts and pull the cable through the firewall. For installation, reverse the removal process. Ensure the grommet seats properly in the firewall. Adjust the cable by ensuring the throttle fully opens when the pedal is depressed. If not, adjust the cable and tighten the locknuts. Ensure the throttle fully closes when the pedal is released.
