My Garage
My Account
Cart
Genuine Pontiac Vibe Turn Signal Flasher
Turn Signal Indicator Flasher- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Turn Signal Flashers found
Pontiac Vibe Turn Signal Flasher
The Pontiac Vibe Turn Signal Flasher activates the front and rear indicators whenever the signal stalk is pressed to clearly indicate an intention to other drivers. The Turn Signal Flasher is housed in the fuse block where it gets a small current from the switch and outputs a series of on-off pulses that cause the signal to blink. Earlier designs utilized a thermal variety Turn Signal Flasher in which resistance heated a springy metal strip until the strip flexed, completing the circuit, cooling, and repeating, thus achieving both the flash and the click. Some of the newer Vibe builds favor a solid-state Turn Signal Flasher that eliminates moving parts while relying on electronic timing chips and transistors, offering steadier operation and full compatibility with low-draw LED bulbs. Both the solid-state and thermal units share the same function of safety. Furthermore, the thermal unit relies on heat and mechanical motion, whereas the solid-state employs circuitry. Moreover, the solid-state is quieter, faster, and does not depend on bulb wattage. When the driver of a Pontiac notices dead or erratic signals, a failing Turn Signal Flasher will spring to mind. Selecting the proper OE-matched component means the Pontiac Vibe will keep signaling reliably mile after mile.
Each OEM Pontiac Vibe Turn Signal Flasher we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.
Pontiac Vibe Turn Signal Flasher Parts Questions & Experts Answers
- Q: What is the function and troubleshooting process for the turn signal flasher unit on Pontiac Vibe?A:The turn signal and hazard flasher is combined and situated at the interior Fuse/relay box category of the Cherokee. During its smooth working, there is a click sound produced at the time of operation of the device. If for instance the turn signals fail on one side while the flasher unit does not click, or if in one side the bulb is flashing faster that usual but on the same side the bulb does not light, then that could mean that there is probably a faulty turn signal bulb. If neither of the turn signals blinks the problem could be a bad flasher unit, a bad turn signal switch, bad turn signal switch, or the flasher is not getting power. Turn signal fuse blown is very easy to diagnose by checking at the fuse box; however before installing a new turn signal fuse, the wiring should be checked for a short. Changing the flasher involves disconnecting the electrical connector and removing the unit from the electrical center; then, the replacement unit has to be an exact match for the old one: before installing the replacement, detailed comparison of the new and the old units is to be conducted; the replacement process is done in the reverse to the removal process.
