My Garage
My Account
Cart
Genuine Pontiac Vibe Wheel Hub Bolt
Wheel Stud- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
6 Wheel Hub Bolts found
Pontiac Vibe Wheel Hub Bolt
The Pontiac Vibe Wheel Hub Bolt secures a wheel to the hub to protect handling and safety. A Wheel Hub Bolt works with the hub bearing unit to attach the wheel flange to the rotating hub so that the bearings spin easily without unwanted movement. If one of the Wheel Hub Bolts bends or strips, the other bolts start taking the load. This gradual compromise may lead to a loss of steering feel. A sudden failure can result in a dangerous loss of control. Over the years of its production, the model has applied simple threaded Wheel Hub Bolt hardware. This allows owners to use simple tools to tap out damaged studs and press in new ones without removing the whole unit unless the Wheel Hub Bolt is factory welded on certain non-driven axle hubs. The bolt patterns vary on Vibe. The smaller wheels require four bolts and the larger versions up to eight bolts. Hence, before buying a wheel, verify the pattern and diameter in the owner manual. The replacement costs are low and usually only a little money per Wheel Hub Bolt. As a result, Pontiac drivers can easily swap them out proactively. This way, your Vibe can corner confidently and keep your every Pontiac ride safe.
Each OEM Pontiac Vibe Wheel Hub Bolt we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.
Pontiac Vibe Wheel Hub Bolt Parts Questions & Experts Answers
- Q: How to replace wheel hub bolts on Pontiac Vibe?A:This procedure has to be done for front as well as rear wheel studs. Initially, take off the wheel by partially unbolting the wheel lug nuts, lifting the vehicle until the wheels can be raised onto jack stands safely. Subsequently, remove the brake disc or the brake drum. Place one lug nut half threaded onto the stud that has to be removed and then use an automobile press tool to force the said stud out of the hub flange. A new stud must be inserted into the hub flange from behind and when this is done, some flat washers and a lug nut is fitted on the stud and the nut is tightened to bring in the stud into position. After this, the stud is seated on its designated position on the flange, the brake drum or disc should be replaced, the wheel placed on the hub and the lug nuts tightened, before lowering the car.
