Genuine Pontiac Wheel Seal

Pontiac Vibe Wheel Seal Parts Questions & Experts Answers

• Q: How to replace drive axle wheel seals on Pontiac Vibe?

  A: Fluid leaks frequently occur due to wear of the drive axle oil seals or the speedometer drive gear oil seal and O-rings. Replacement of these seals is relatively easy since the repairs can usually be performed without removing the transaxle from the vehicle. The drive axle oil seals are located on either side of the transaxle where the drive axle shaft is splined into the differential. If leakage at the seal is suspected, raise the vehicle and support it securely on jack stands. If the seal is leaking, fluid will be found on the side of the transaxle. Remove the drive axle assembly. Using a screwdriver or prybar, carefully pry the oil seal out of the transaxle bore, ensuring not to gouge or nick the surface of the seal bore. If the oil seal cannot be removed with a screwdriver or prybar, a special oil seal removal tool will be required. Using a seal driver or a large deep socket as a drift, install the new oil seal, driving it into the bore squarely and ensuring that it is completely seated. Lubricate the lip of the new seal with multi-purpose grease. Install the drive axle assembly, being careful not to damage the lip of the new seal. For the vehicle speed sensor oil seal replacement, additional guidance is available.