Genuine Saturn LS1 Air Filter Box

Air Filter Housing
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Air Filter Boxs found

  • Saturn LS1 Air Filter Box - 24421638
    View related parts

    Saturn LS1 Housing,Air Cleaner Upper

    Part Number: 24421638
    $3.63 MSRP: $78.88
    You Save: $75.25 (96%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: COVER, Air Cleaner Intake; Upper Housing
    • Position: Upper
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    Fits the following Vehicles:
    • 2000 Saturn LS1 | LS, LS1, LS2, LW1, LW2 | 4 Cyl 2.2L
  • Saturn LS1 Air Filter Box - 24421637
    View related parts
    Product Specifications
    • Other Name: HOUSING, Air Cleaner To Carb/Throttle Body Mounting; Lower Housing
    • Position: Lower
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    Fits the following Vehicles:
    • 2000 Saturn LS1 | LS, LS1, LS2, LW1, LW2 | 4 Cyl 2.2L

Saturn LS1 Air Filter Box

The Saturn LS1 Air Filter Box is the first stage of engine protection and encloses the pleated filter element in a strong housing so that only clean air proceeds to the intake manifold. This integral component helps Saturn sedans run free of dirt. The LS1 power plant demands nearly 10,000 gallons of air for burning a single gallon of fuel and is continuously bombarded with dust, sand, leaves, and other abrasive matter that will scour the pistons, rings, valves, and cylinder walls in next to no time. The incoming stream is directed through the filter media in the Air Filter Box. This traps any contaminant before it enters the combustion chambers or otherwise contaminates the engine oil. All Saturn iterations of the LS1 applied the same two-piece plastic Air Filter Box, hinged to make filter swaps easy and shaped to direct airflow around the Air Filter Box without a restriction. There are no competing styles to compare, just minor gasket upgrades over time. If you keep the Air Filter Box in Saturn LS1 properly closed and replace the filter as per schedule, it will maintain strong performance and longevity.

Each OEM Saturn LS1 Air Filter Box we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Saturn LS1 Air Filter Box Parts Questions & Experts Answers

  • Q: How to remove the Air Filter Box on Saturn LS1?
    A:
    To remove the air intake duct on four-cylinder models, start by turning the ignition key to OFF. Then, disconnect the electrical connector from the Intake Air Temperature (IAT) sensor and the PCV hose from the duct. Loosen the hose clamp screws at both ends of the duct and remove it. For the air filter box, remove the air intake duct and the mounting bolt from the back side of the box. Detach the wiring harness from the clip and work the box locator pin out of its mounting bracket grommet. The procedure for V6 models is similar but also involves disconnecting the electrical connector from the Mass Air Flow/Intake Air Temperature (MAF/IAT) sensor and removing the duct and sensor as a single assembly. Finally, to remove the fresh air inlet duct and resonator assembly, remove the bumper cover and beam, the right headlight assembly, and the resonator mounting bolt. Pull off the resonator and then carefully work the inlet duct out of the vehicle. The installation is the reverse of removal.

Related Saturn LS1 Parts