Buick 13281795 Shaft Assembly, Rear Stabilizer

You can Select Your Vehicle to check if 13281795 fits your vehicle.

During installation, the stabilizer bar and bushings are installed, lubricated with vegetable oil, and positioned with the slit in each bushing facing toward the rear of the vehicle.

The installation process involves lubricating the bushings, replacing suspension fasteners, and tightening them to the specified torque. Finally, tighten the wheel lug nuts to the torque specifications.

After removing the stabilizer bar link, you should install the wheels and lug nuts, then lower the vehicle and tighten the wheel lug nuts to the proper torque.

To remove the sway bar kit, start by loosening the rear wheel lug nuts and blocking the front wheels to prevent the vehicle from rolling. Then, raise the rear of the vehicle and support it securely on jackstands before removing the rear wheels. Next, remove the rear section of the exhaust system and the parking brake cables from the trailing arms. Remove the coil springs and the brake calipers without disconnecting the brake hoses. Mark the position of the subframe to the chassis and support the subframe with two floor jacks. Remove the subframe mounting bolts and lower the subframe slightly to access the sway bar kit bracket bolts. Detach the sway bar links from the bar and remove the sway bar kit, inspecting the sway bar bushings for any signs of damage. If the sway bar bushings are damaged, they should be replaced. To install the sway bar kit, lubricate the sway bar bushings with vegetable oil and replace all suspension fasteners with new ones, tightening them to the proper torque specifications. Finally, tighten the brake fasteners and the wheel lug nuts to the correct torque specifications.