Contact Us: Live Chat or 1-888-737-9766
×
Search Bar
Search by Part Number, Part Name, Description
My Garage
My Account
My Cart
Make sure this part fits your vehicle

Cadillac 20937817 Rear Axle Assembly (3.42 Ratio)

2010-2014 Cadillac Escalade

GM 20937817 Rear Axle Assembly (3.42 Ratio)
GM 20937817 Rear Axle Assembly (3.42 Ratio)
  • Part Description
    Axle Assembly, Rear (3.42 Ratio)
  • Position
    Rear
  • Replaces
    25988384
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Customer Questions & Answers
$2258.77 MSRP: $2920.20
You Save: $661.43 (23%)
Currently Unavailable

Due to manufacturer supply shortage, this item isn’t currently available for ordering.

  • Product Specifications

    BrandGenuine Cadillac
    Manufacturer Part Number20937817
    Part DescriptionAxle Assembly, Rear (3.42 Ratio)
    Other NamesAxle Housing
    PositionRear
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces25988384
    ManufacturerGeneral Motors
    SKU20937817
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65

  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2010-2014 Cadillac Escalade8 Cyl 6.2L FlexYUKON/DENALI/ESCALADE

Customer Questions & Answers

Q:
I would like to confirm if this is the correct part number for my vehicle. Please advise. Thank you. Posted by GMPartsGiant Specialist
A:
You can Select Your Vehicle to check if 20937817 fits your vehicle.
Posted by GMPartsGiant Specialist
Q:
What are the initial steps to remove the rear axle assembly from a 2012 Chevrolet Suburban? Posted by Customer
A:
The initial steps are to loosen the rear wheel lug nuts, raise the rear of the vehicle, and support it securely on jackstands.
Posted by GMPartsGiant Specialist
See expert answers on similar Axle Shaft
Q:
How is power transmitted from the front differential/axle to the front wheels of the 2011 Chevrolet Suburban? Posted by Customer
A:
Power is transmitted through a pair of driveaxles equipped with sliding constant velocity (CV) joints capable of both angular and axial motion.
Posted by GMPartsGiant Specialist
See expert answers on similar Axle Shaft
Q:
How do you remove and install components in the front differential for AWD systems of the 2011 Chevrolet Suburban? Posted by Customer
A:
To remove and install components in the front differential for AWD systems, follow these steps:Remove the stabilizer bar link and, if applicable, the front shock absorber.
Posted by GMPartsGiant Specialist
See expert answers on similar Axle Shaft
Q:
How should the inner end of the driveaxle be lowered and removed of the 2009 Chevrolet Suburban? Posted by Customer
A:
The inner end of the driveaxle should be lowered and pulled out of the hub, carefully guiding the driveaxle out from under the vehicle.
Posted by GMPartsGiant Specialist
See expert answers on similar Axle Shaft
Q:
Is there an optional feature available for the rear axle assembly of the 2013 Chevrolet Suburban? Posted by Customer
A:
Yes, there is an optional locking limited-slip rear axle available.
Posted by GMPartsGiant Specialist
See expert answers on similar Axle Shaft
Q:
What steps should be followed for the 2008 Chevrolet Tahoe? Posted by Customer
A:
For leaf spring models, the spring U-bolts should be disconnected, followed by removing the springplates. Then, the jack can be lowered under the differential to remove the rear axle assembly.
Posted by GMPartsGiant Specialist
See expert answers on similar Axle Shaft
Q:
What are the initial steps to remove and install components in the front differential of selectable 4WD systems for the 2009 Chevrolet Tahoe? Posted by Customer
A:
The initial steps to remove and install components in the front differential of selectable 4WD systems are as follows: Loosen the wheel lug nuts. Raise the vehicle securely on jackstands. Remove the right front wheel. Remove the differential carrier splash shield if equipped. Drain the lubricant from the front differential. For 4WD systems, unbolt the right driveaxle from the axleshaft flange and support it out of the way. Remove the front axle shift motor and, if applicable, disconnect the front stabilizer link or remove the front shock absorber/coil spring assembly. On 2500/3500 models, remove the front axle bracket bolts and slide the bracket forward for additional clearance. Support the differential carrier with a floor jack and a block of wood.
Posted by GMPartsGiant Specialist
See expert answers on similar Axle Shaft
Q:
What should be done if the 2008 Chevrolet Tahoe has a differential carrier splash shield? Posted by Customer
A:
If the vehicle has a differential carrier splash shield, it should be removed after removing the driveaxle/hub nut.
Posted by GMPartsGiant Specialist
See expert answers on similar Axle Shaft
Q:
How do you remove the semi-floating axle shaft for the 2010 Chevrolet Tahoe? Posted by Customer
A:
To remove the semi-floating axle shaft, you need to remove the C-lock from the groove on the inner end of the axleshaft and withdraw the shaft, being careful not to damage the oil seal.
Posted by GMPartsGiant Specialist
See expert answers on similar Axle Shaft
Q:
What does the optional locking limited-slip rear axle do for the 2013 Chevrolet Tahoe? Posted by Customer
A:
The optional locking limited-slip rear axle slows the rotation of the differential case when one wheel loses traction.
Posted by GMPartsGiant Specialist
See expert answers on similar Axle Shaft
Q:
Why is it important to inspect the boots periodically for the 2010 Chevrolet Tahoe? Posted by Customer
A:
It is important to inspect the boots periodically for damage and leaking lubricant, as torn CV joint boots must be replaced immediately to prevent damage to the joints.
Posted by GMPartsGiant Specialist
See expert answers on similar Axle Shaft
Q:
What should be done for2008 Chevrolet Suburbans with a locking differential? Posted by Customer
A:
For models with a locking differential, you should rotate the differential until the shaft touches the case for access to the C-locks.
Posted by GMPartsGiant Specialist
See expert answers on similar Axle Shaft
Q:
What are the initial steps to remove the driveaxle on the 2013 GMC Yukon? Posted by Customer
A:
The initial steps are to loosen the wheel lug nuts, raise the front of the vehicle, and support it securely on jackstands.
Posted by GMPartsGiant Specialist
See expert answers on similar Axle Shaft
Q:
What type of front axle assembly is used in the 2012 GMC Yukon? Posted by Customer
A:
4WD models use a fully independent front axle assembly.
Posted by GMPartsGiant Specialist
See expert answers on similar Axle Shaft
Q:
What should be done before removing a semi-floating axle shaft for the 2012 GMC Yukon? Posted by Customer
A:
Before removing a semi-floating axle shaft, you should loosen the rear wheel lug nuts and raise the vehicle on jackstands.
Posted by GMPartsGiant Specialist
See expert answers on similar Axle Shaft
Q:
What should be done if a CV joint boot is damaged for the 2012 GMC Yukon? Posted by Customer
A:
If a boot is damaged, the CV joint can be disassembled and cleaned, but if any parts are damaged, the entire driveaxle assembly must be replaced as a unit.
Posted by GMPartsGiant Specialist
See expert answers on similar Axle Shaft
Q:
What are the initial steps to remove and install components in the front differential of selectable 4WD systems for the 2011 GMC Yukon? Posted by Customer
A:
The initial steps to remove and install components in the front differential of selectable 4WD systems are as follows: Loosen the wheel lug nuts. Raise the vehicle securely on jackstands. Remove the right front wheel. Remove the differential carrier splash shield if equipped. Drain the lubricant from the front differential. For 4WD systems, unbolt the right driveaxle from the axleshaft flange and support it out of the way. Remove the front axle shift motor and, if applicable, disconnect the front stabilizer link or remove the front shock absorber/coil spring assembly. On 2500/3500 models, remove the front axle bracket bolts and slide the bracket forward for additional clearance. Support the differential carrier with a floor jack and a block of wood.
Posted by GMPartsGiant Specialist
See expert answers on similar Axle Shaft
Q:
What should be done after raising and supporting it on jackstands for the 2009 GMC Yukon? Posted by Customer
A:
After raising the vehicle and supporting it on jackstands, a jack should be positioned under the rear axle differential housing.
Posted by GMPartsGiant Specialist
See expert answers on similar Axle Shaft
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 20937817, the Right Choice

Your vehicle deserves only genuine OEM GM parts and accessories. To ensure reliability, purchase GM part # 20937817 Rear Axle Assembly (3.42 Ratio). It is sometimes referred to as Cadillac Axle Shaft. Our GM parts and accessories are expedited directly from authorized GM dealers strategically located all across the U.S. and are backed by the manufacturer's 12 month, 12,000 mile warranty. OEM GM parts are the best for restoring your vehicle to factory condition performance. This part fits specific Cadillac Escalade models.

Affordable, reliable and built to last, GM part # 20937817 Rear Axle Assembly (3.42 Ratio) stands out as the smart option. GMPartsGiant.com is your prime online source with the biggest and best selection of genuine GM parts and accessories at giant discounted prices. We have the OEM GM parts and accessories you need at the wholesale prices. GMPartsGiant.com has you covered no matter what type of GM vehicle you drive. For detailed Cadillac parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly