Your vehicle deserves only genuine OEM GM parts and accessories. To ensure reliability, purchase GM part # 22720705 Caliper Assembly, Front Brake. It is sometimes referred to as Chevrolet Brake Calipers. Our GM parts and accessories are expedited directly from authorized GM dealers strategically located all across the U.S. and are backed by the manufacturer's 12 month, 12,000 mile warranty. OEM GM parts are the best for restoring your vehicle to factory condition performance. This part fits specific Chevrolet Cobalt models.
Affordable, reliable and built to last, GM part # 22720705 Caliper Assembly, Front Brake stands out as the smart option. GMPartsGiant.com is your prime online source with the biggest and best selection of genuine GM parts and accessories at giant discounted prices. We have the OEM GM parts and accessories you need at the wholesale prices. GMPartsGiant.com has you covered no matter what type of GM vehicle you drive. For detailed Chevrolet parts information, click here.
×
My Garage
My Account
My Cart
Make sure this part fits your vehicle
Chevrolet 22720705 Caliper Assembly, Front Brake
2005-2008 Chevrolet Cobalt
- Part DescriptionCALIPER, Wheel Brake Cylinder/Caliper
- PositionFront
- ManufacturerGeneral Motors
$191.86 MSRP: $255.16 1
You Save: $63.30 (25%)
Ships in 1-2 Business Days
Product Specifications
Brand Genuine Chevrolet Manufacturer Part Number 22720705 Part Description CALIPER, Wheel Brake Cylinder/Caliper Other Names Caliper Item Dimensions 9.9 x 7.5 x 5.2 inches Item Weight 9.70 Pounds Position Front Condition New Fitment Type Direct Replacement Manufacturer General Motors SKU 22720705 Shipping & Return Shipping Policy Return Policy Warning: California’s Proposition 65Vehicle Fitment
Year Make Model Engine Important vehicle option details 2005-2008 Chevrolet Cobalt 4 Cyl 2.0L, 4 Cyl 2.2L, 4 Cyl 2.4L 2 DOOR, 4 DOOR, LEVEL 4 PERFORMANCE (SS) 2 DOOR, LEVEL 4 PERFORMANCE/SC (SS) 2 DOOR, LEVEL ONE (LS) 2 DOOR, LEVEL ONE (LS) 4 DOOR, LEVEL THREE (SS) 2 DOOR, LEVEL THREE (SS) 4 DOOR, LEVEL TWO (LT) 2 DOOR, LEVEL TWO (LT) 4 DOOR
Customer Questions & Answers
- Q:I would like to confirm if this is the correct part number for my vehicle. Please advise. Thank you. Posted by GMPartsGiant Specialist
- A:You can Select Your Vehicle to check if 22720705 fits your vehicle.Posted by GMPartsGiant Specialist
- Q:How do you remove the front brakes for the 2006 Chevrolet Cobalt? Posted by Customer
- A:Start by loosening the lug nuts on the front wheels, but don't remove them completely. Then, raise the front of the vehicle and secure it on jackstands. Remove the front wheels. Disconnect the brake line from the caliper and plug it to prevent contaminants from entering the brake system and to minimize brake fluid loss. For calipers without Brembo, remove the caliper guide pin bolts and detach the caliper from its mounting bracket. For models with Brembo calipers, remove the two caliper mounting bolts and detach the caliper from the steering knuckle. To install the caliper, reverse the removal procedure, ensuring to replace the copper sealing washers on the brake line fitting. Tighten the caliper guide pin bolts and brake line banjo fitting bolt to the specified torque. Bleed the brake system, install the wheels and lug nuts, and lower the vehicle, tightening the lug nuts to the specified torque.Posted by GMPartsGiant Specialist
- See expert answers on similar Brake Calipers
- Q:How do you remove the rear brakes for the 2005 Saturn ION? Posted by Customer
- A:To remove the rear brakes, start by loosening the lug nuts on the rear wheels. Then, raise the rear of the vehicle and secure it on jackstands. Remove the rear wheels. Inside the vehicle, remove the boot around the parking brake handle and loosen the adjuster nut for the parking brake cable. Disconnect the parking brake cable end from the caliper lever and detach the cable from the caliper bracket. Depress the caliper piston with a C-clamp, unscrew the brake line banjo fitting, and detach the brake line from the caliper, plugging it to prevent contamination. Use an open-end wrench to hold the flats on the caliper guide pins while removing the guide pin bolt. Detach the caliper from its mounting bracket. To install the caliper, reverse the removal procedure, tightening the caliper guide pin bolts and brake line banjo fitting bolt to the specified torque. Bleed the brake system, install the wheels and lug nuts, lower the vehicle, and tighten the lug nuts to the specified torque. Finally, adjust the parking brake.Posted by GMPartsGiant Specialist
- See expert answers on similar Brake Calipers
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!
Genuine GM Part 22720705, the Right Choice
Why choose GM Parts Giant
- Dedicated Service
Your complete satisfaction is our #1 goal
- Lowest Prices
Best deals on genuine OE parts from dealerships
- Fast Delivery
Orders are processed and delivered promptly