Chevrolet 9442872 Flasher,Turn Signal Lamp

You can Select Your Vehicle to check if 9442872 fits your vehicle.

The hazard flasher is located behind the main light switch behind the dash panel.

On models equipped with a Delco Loe II anti-theft audio system, be sure the The lockout feature is turned off before performing any procedure which requires disconnecting the battery. The turn signal flasher, a small canister-shaped unit located in the convenience center under the dash, flashes the tum signals. When the flasher unit is functioning properly, an audible click can be heard during its operation. If the turn signals fail on one side or the other and the flasher unit does not make its characteristic clicking sound, a faulty turn signal bulb is indicated. If both turn signals fail to blink, the problem may be due to a blown fuse, a faulty flasher unit, a broken switch or a loose or open connection. If a quick check of the fuse box indicates that the turn signal fuse has blown, check the wiring for a short time before installing a new fuse. To replace the flasher, simply pull it out of its electrical connector. Make sure that the replacement-unit is identical to the original. Compare the old one to the new one before installing it. Installation is the reverse of removal. The hazard flasher, a small canister-shaped unit located behind the main light switch behind the dash panel, flashes all four tum signals simultaneously when activated. The hazard flasher is checked in a fashion similar to the turn signal flasher. To replace the hazard flasher, pull it from its connector under the dash and install a new one. Make sure the replacement unit is identical to the one it replaces. Compare the old one to the new one before installing it. Installation is the reverse of removal.