Chevrolet 25952758 Radiator Assembly

All 2010-17 models will require removing that vehicle's condenser entirely, carefully detaching it from the lower retaining tabs and lifting it off the radiator, taking care not to damage the fins on either unit. If you can find the big round shape of a radiator, look for leaks or scratches where you will need special tools for repairs. Dirt and bugs can be sprayed off with a garden hose nozzle from the back side, and it should be flushed out with a garden hose prior to installation. Examine the rubber mounts that sit at the very bottom of the radiator for signs of wear or deterioration and replace them (if needed). The installation is the reverse of the removal process, making sure to guide the condenser/radiator/fan assembly into position with the rubber mounts seating into the support, then tightening the bracket bolts on the radiator and air conditioning condenser. And remember, once you install it, fill the cooling system with the correct mixture of antifreeze and water, start the engine to confirm there are no leaks, allow it to reach normal operating temperature (so any air in the system escapes) and check the coolant level again, topping off if necessary, and check the transaxle fluid, adding more if necessary).

Start the engine and check for leaks. Allow the engine to reach normal operating temperature, then recheck the coolant level and add more if required.