GM 30020918 Bar,Front Stabilizer (On Esn)

Park the vehicle, raise the front end, place it on jackstands, and secure it well. Before you take out the sway bar, look for any painting that marks where the bushings hold up the bar. If there are no markings, add them with a marker so you can make sure the bar goes back to exactly the right position when you put it on. Write down where the bushings and clamp attach to the sway bar, so you can put them back just right after removing them. Unscrew the ball joint from the front suspension lower arms of the car. Pay attention to how each spacer, washer, and bushing fits. Take off the sway bar by unscrewing the bracket bolts. Put the sway bar bushings on the bar first, with the slit openings facing front. Line them up with the marks made earlier so you can assemble it right. Slide the brackets over the bushings, lift the bar to the frame, and gently screw bracket bolts in place. Finally, install the sway bar ball joint.