Pontiac 88969094 Radiator

You can Select Your Vehicle to check if 88969094 fits your vehicle.

To remove the radiator, follow these steps: Begin by disconnecting the cable from the negative terminal of the battery. Then, drain the engine coolant. Proceed to detach both the upper and lower radiator hoses from the radiator, as well as the reservoir hose from the radiator filler neck. If your vehicle has an automatic transaxle, disconnect the cooler lines from the radiator, using a drip pan to catch any fluid and capping the fittings. Remove the cooling fan. Next, remove the two upper radiator mounting brackets. Carefully lift out the radiator, being cautious of dripping fluids and sharp fins. Once the radiator is removed, you can inspect it for leaks, damage, or blockage. If repairs are needed, it's recommended to have a professional radiator shop or dealer service department perform the work, as they have the necessary expertise. You can clean bugs and dirt from the radiator using compressed air and a soft brush, being careful not to bend the cooling fins. For installation, reverse the removal procedure, ensuring that the rubber mounts are in place on the bottom of the radiator. After installation, fill the cooling system with the appropriate mixture of antifreeze and water. Start the engine and check for any leaks. Allow the engine to reach its normal operating temperature, indicated by both radiator hoses becoming hot. Recheck the coolant level and add more if necessary. If your vehicle has an automatic transmission, check and add fluid as needed.