Make sure this part fits

Saturn 19371505 MANIFOLD,LWR INT

2007-2009 Saturn Aura

Customer Questions & Expert Answers (8)
GM 19371505 MANIFOLD,LWR INT
  • Part Description
    MANIFOLD,LWR INT
  • Replaces
    12571079, 92068635
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Saturn
    Manufacturer Part Number19371505
    Part DescriptionMANIFOLD,LWR INT
    Other NamesIntake Manifold
    Item Dimensions7.2 x 7.3 x 15.6 inches
    Item Weight6.20 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces12571079, 92068635
    ManufacturerGeneral Motors
    SKU19371505
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2007-2009 Saturn Aura6 Cyl 3.6LHYBRID 4 DOOR NOTCHBACK, XE 4 DOOR NOTCHBACK, XR 4 DOOR NOTCHBACK
  • Customer Questions & Expert Answers

    Q:
    I am wonder if this is complete and correct part for my vehicle. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 19371505 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    What is the first step to remove the intake manifold covers for the 2006 Cadillac CTS? Posted by Customer
    A:
    First, disengage the locking tab on the oil filler spout with a small screwdriver and rotate it counterclockwise to remove.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What specific steps should be taken for the 2004 Cadillac CTS with 2.6L and 3.6L engines? Posted by Customer
    A:
    For these models, disconnect the wiring from the MAF sensor, remove the air intake duct, disconnect the throttle control motor wiring, and the PCV pipe. Then, at the rear of the engine, disconnect the wiring from the barometric pressure sensor, fuel injector harness, EVAP purge solenoid, and variable intake manifold control valve motor. After that, remove the manifold brace bolts and plenum bolts.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What electrical connections need to be disconnected during the removal process for the 2004 Cadillac CTS? Posted by Customer
    A:
    Disconnect the electrical connector to the throttle body, as well as the electrical connectors from the fuel injectors, EVAP solenoid, MAP sensor, and throttle body sensors, labeling each connector for reassembly.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What should be done after removing the engine cover for the 2009 Chevrolet Equinox? Posted by Customer
    A:
    Disconnect the brake booster vacuum tube from the intake manifold, then disconnect the front spark plug wires from the spark plugs and the bracket.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What should be done after the installation is complete for the 2008 Chevrolet Equinox? Posted by Customer
    A:
    The remainder of the installation follows the reverse order of removal. Finally, reconnect the battery and run the engine to check for vacuum and fuel leaks.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What steps are involved for the 2007 Pontiac G6? Posted by Customer
    A:
    For 3.5L V6 models, remove the intake duct from the throttle body and label it, then disconnect the electrical connectors from the throttle body, the EVAP canister purge valve, the IAT sensor, and the EGR valve if equipped.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    How do you detach the intake manifold from the cylinder head for the 2009 Pontiac G6? Posted by Customer
    A:
    Remove the intake manifold mounting bolts and nuts, and then detach the intake manifold from the cylinder head.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Intake Manifold
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 19371505, the Right Choice

To ensure reliability, purchase GM part # 19371505 MANIFOLD,LWR INT. It is sometimes referred to as Saturn Intake Manifold. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific Saturn Aura models.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 19371505 MANIFOLD,LWR INT. You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed Saturn parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly