How to remove and replace the front crankshaft seal in V6 engine on 1986 Chevrolet Caprice?

Remove the timing chain cover. Using a punch, drive out the old oil seal and shedder by pushing from the front toward the rear of the timing chain cover. Coil the new oil seal packing around the opening with the ends of the packing at the top, then drive in the new shedder using a punch, staking it in place in at least three locations. Rotate the handle of a hammer or equivalent tool to size the packing until the balancer hub can be inserted through the opening. Finally, re-install the timing chain cover.

Genuine 1986 Chevrolet Caprice Crankshaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Crankshaft Seals found

View related parts
1986 Chevrolet Caprice Seal,Crankshaft Rear Oil
Part Number: 10088158
$33.43 MSRP: $55.35
You Save: $21.92 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: SEAL, Engine Rear Main Bearing
- Position: Rear
- Item Weight: 0.40 Pounds
- Item Dimensions: 6.7 x 5.2 x 0.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10088158
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 1986 Chevrolet Caprice Submodels:
- 4 DOOR, BROUGHAM 4 DOOR, CLASSIC 2 DOOR, CLASSIC 4 DOOR, CLASSIC LS 4 DOOR, CLASSIC STATION WAGON, LS 4 DOOR, STATION WAGON | 6 Cyl 4.3L, 8 Cyl 4.3L, 8 Cyl 5.0L, 8 Cyl 5.7L
View related parts
1986 Chevrolet Caprice Seal Unit, Crankshaft Rear (Free Of Asbestos)
Part Number: 10121044
$36.04 MSRP: $56.68
You Save: $20.64 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: SEAL KIT, Engine Rear Main Bearing; Rear Main Seal
- Position: Rear
- Item Weight: 0.40 Pounds
- Item Dimensions: 6.7 x 5.0 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10121044
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 1986 Chevrolet Caprice Submodels:
- 4 DOOR, BROUGHAM 4 DOOR, CLASSIC 2 DOOR, CLASSIC 4 DOOR, CLASSIC STATION WAGON, STATION WAGON | 6 Cyl 3.8L, 6 Cyl 4.3L, 8 Cyl 4.4L, 8 Cyl 5.0L
View related parts
1986 Chevrolet Caprice Seal Assembly, Cross Shaft Front Oil
Part Number: 10111769
$2.77 MSRP: $4.35
You Save: $1.58 (37%)
ADD TO CART
Product Specifications
- Other Name: SEAL, Engine Front Cover & Crankshaft Seal
- Position: Front
- Replaced by: 10243247
- Item Weight: 0.30 Pounds
- Item Dimensions: 2.9 x 3.0 x 0.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10111769
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 1986 Chevrolet Caprice Submodels:
- 4 DOOR, BROUGHAM 4 DOOR, CLASSIC 2 DOOR, CLASSIC 4 DOOR, CLASSIC STATION WAGON, STATION WAGON | 6 Cyl 3.8L, 6 Cyl 4.3L, 8 Cyl 4.4L, 8 Cyl 5.0L
View related parts
1986 Chevrolet Caprice Seal Assembly, Crankshaft Oil
Part Number: 552711
Product Specifications
- Other Name: SEAL, Engine Front Cover & Crankshaft Seal
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.6 x 3.5 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 552711
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 1986 Chevrolet Caprice Submodels:
- 4 DOOR, BROUGHAM 4 DOOR, CLASSIC 2 DOOR, CLASSIC 4 DOOR, CLASSIC STATION WAGON, STATION WAGON | 8 Cyl 5.0L, 8 Cyl 5.7L Diesel

1986 Chevrolet Caprice Crankshaft Seal

We are your prime source for competitively priced and high-quality OEM 1986 Chevrolet Caprice Crankshaft Seal. We provide you with parts that will allow you to save a lot of money without sacrificing quality. All our OEM parts are backed by the manufacturer's warranty and shipped out at a swift rate.

1986 Chevrolet Caprice Parts Questions & Experts Answers

Q: How to remove and replace the front crankshaft seal in V6 engine on 1986 Chevrolet Caprice?
A: Remove the timing chain cover. Using a punch, drive out the old oil seal and shedder by pushing from the front toward the rear of the timing chain cover. Coil the new oil seal packing around the opening with the ends of the packing at the top, then drive in the new shedder using a punch, staking it in place in at least three locations. Rotate the handle of a hammer or equivalent tool to size the packing until the balancer hub can be inserted through the opening. Finally, re-install the timing chain cover.