My Garage
My Account
Cart
Genuine 1998 Pontiac Grand Prix Intake Manifold
Engine Intake Manifold- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
7 Intake Manifolds found
1998 Pontiac Grand Prix Manifold, Vacuum Source
Part Number: 24503488$6.90 MSRP: $11.44You Save: $4.54 (40%)Ships in 1-3 Business DaysProduct Specifications- Other Name: MANIFOLD, Intake Manifold Vacuum; Manifold
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.3 x 2.2 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 24503488
- Warranty: This genuine part is guaranteed by GM's factory warranty.
1998 Pontiac Grand Prix Manifold Asm,Vacuum Source
Part Number: 24506013$6.46 MSRP: $10.18You Save: $3.72 (37%)Product Specifications- Other Name: MANIFOLD, Intake Manifold Vacuum
- Replaces: 24502962, 24504464
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.3 x 2.2 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 24506013
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: MANIFOLD KIT, Engine Fuel Intake Manifold; Intake Manifold, Intake Plenum
- Position: Upper
- Item Weight: 8.10 Pounds
- Item Dimensions: 24.5 x 14.2 x 7.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89017272
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: MANIFOLD, Engine Fuel Intake Manifold; Intake Manifold
- Position: Lower
- Replaces: 24506263
- Item Weight: 14.30 Pounds
- Item Dimensions: 26.1 x 16.9 x 9.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 24508387
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: MANIFOLD, Engine Fuel Intake Manifold; Intake Manifold
- Position: Upper
- Item Weight: 7.10 Pounds
- Item Dimensions: 20.0 x 12.8 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 24505664
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: MANIFOLD, Engine Fuel Intake Manifold; Intake Manifold, Manifold
- Position: Lower
- Item Weight: 13.30 Pounds
- Item Dimensions: 19.8 x 13.3 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 24505729
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: Intake Manifold
- Replaces: 24505728, 24508923
- Item Weight: 13.10 Pounds
- Item Dimensions: 6.1 x 26.3 x 13.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19417844
- Warranty: This genuine part is guaranteed by GM's factory warranty.
1998 Pontiac Grand Prix Intake Manifold
We are your prime source for competitively priced and high-quality OEM 1998 Pontiac Grand Prix Intake Manifold. We provide you with parts that will allow you to save a lot of money without sacrificing quality. All our OEM parts are backed by the manufacturer's warranty and shipped out at a swift rate.
1998 Pontiac Grand Prix Parts Questions & Experts Answers
- Q: How to remove and install an Intake Manifold in 3.4L V6 engine on 1998 Pontiac Grand Prix?A: To remove the manifold, pull the negative battery cable and if the car has a Theftlock audio system then its lockout has to be turned off.. Decrease the fuel system pressure and unbolt the fuel rail and, be ready to capture and apply caps on the fittings the same as before to avoid contamination. Beside this, do the plenum, take off the radiator hose from the thermostat housing, squeeze the coolant temperature sensor and then take off the heater pipe nut at the throttle body. After that, unbolt the manifold mounting bolts and nuts and do not pry between the manifold and heads to damage the aluminium gasket sealing surface. If you are installing a new manifold set all fittings and sensors from old manifold to the new one. When it comes to installation you must make a point of making the mating surfaces of the cylinder heads, block, and manifold free from any contaminants, using gasket solvents in case. Any sealant and old gasket material must be removed through scraping and the surfaces have to be cleaned with either lacquer thinner or acetone. Clean the area around the bolt holes with a tap and compressed air if necessary; then put the intake manifold gasket into place. Take a lot of care when positioning the manifold, and put the mounting bolts and nuts loosely in their respective positions, and it may be wise to use spacer bolts to facilitate alignment. Round off the nuts and bolts in a two-step-half turn up to the required amount of torque starting from the centre. Starting with the last component used, reinstall all of the remaining parts if any and change the engine's oil and filter, refill the cooling system and finally start the engine and look for any leakage.
