How to remove and install a semi-floating axle shaft on 2019 Chevrolet Express?

To remove a semi-floating axleshaft, first loosen the rear wheel lug nuts, raise the rear of the vehicle, and securely support it on jackstands while blocking the front wheels. Remove the wheel and brake disc or drum, then take off the differential cover and allow the lubricant to drain into a container. Next, remove the lock screw and, for models with a conventional differential, take out the pinion shaft. For models with a locking differential, withdraw the pinion shaft partway, rotate the differential until the shaft touches the case for access to the C-locks, and avoid turning the axleshafts afterward to prevent mispositioning of the spider gears. Have an assistant push in on the outer flanged end of the axleshaft while you remove the C-lock from the groove in the inner end of the shaft, ensuring that on models with a locking differential, the C-lock is positioned correctly before removal. Once the C-lock is removed, withdraw the axleshaft carefully to avoid damaging the oil seal, noting that it is advisable to replace the seal whenever the axleshaft is removed, and ensure any thrust washer in the differential does not fall out. For installation, insert the axleshaft into the housing and seat it securely in the differential, then install the C-lock in the axleshaft groove and pull out on the flange to lock it. Insert the pinion shaft, align the hole with the lock screw hole, and install the lock screw with a non-hardening, thread-locking compound applied to its threads before tightening it to the specified torque. Install the cover and fill the differential with the specified lubricant, then install the brake disc or drum, followed by the wheel and lug nuts, and lower the vehicle, tightening the lug nuts to the specified torque. For a full-floating axleshaft, remove the bolts attaching the axleshaft flange to the hub, tap the flange with a soft-face hammer to loosen the shaft, grip the rib in the face of the flange with locking pliers, twist the shaft slightly in both directions, and withdraw it from the housing while placing a drip pan underneath to catch any leaking lubricant. Installation is the reverse of removal, ensuring the axleshaft is held level to engage the splines at the inner end with those in the differential side gear, and always use a new gasket on the flange while keeping both the flange and hub mating surfaces free of grease and oil.

Genuine 2019 Chevrolet Express Axle Shaft

Car Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Axle Shafts found

View related parts
2019 Chevrolet Express Rear Axle Shaft Assembly
Part Number: 19207226
$331.78 MSRP: $549.12
You Save: $217.34 (40%)
ADD TO CART
Product Specifications
- Other Name: Shaft Asm,Rear Axle ; Shaft, Rear Axle Drive; Axle Shaft
- Position: Rear
- Replaced by: 86547051
- Item Weight: 32.90 Pounds
- Item Dimensions: 43.3 x 10.9 x 9.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19207226
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2019 Chevrolet Express Submodels:
- 1 TON CARGO EXPRESS, 1 TON CARGO SAVANA, 1 TON COMMERCIAL/RV CUTAWAY, 1 TON PASSENGER, 3/4 TON CARGO EXPRESS, 3/4 TON CARGO SAVANA, 3/4 TON PASSENGER EXPRESS, 3/4 TON PASSENGER SAVANA, Van 3/4 Ton Cargo Express | 4 Cyl 2.8L Diesel, 6 Cyl 4.3L, 8 Cyl 4.8L, 8 Cyl 4.8L Flex, 8 Cyl 5.3L, 8 Cyl 6.0L, 8 Cyl 6.0L Flex, 8 Cyl 6.6L, 8 Cyl 6.6L Diesel
View related parts
2019 Chevrolet Express Rear Axle Shaft
Part Number: 84018866
$136.44 MSRP: $215.66
You Save: $79.22 (37%)
ADD TO CART
Product Specifications
- Other Name: Shaft, Rear Axle ; Shaft, R/Axl; Axle Shaft
- Position: Rear
- Item Weight: 19.20 Pounds
- Item Dimensions: 43.0 x 5.6 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84018866
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2019 Chevrolet Express Submodels:
- 1 TON COMMERCIAL/RV CUTAWAY | 4 Cyl 2.8L Diesel, 6 Cyl 4.3L, 8 Cyl 6.0L, 8 Cyl 6.0L Flex, 8 Cyl 6.6L
View related parts
2019 Chevrolet Express Rear Axle Shaft
Part Number: 84018867
$111.31 MSRP: $175.92
You Save: $64.61 (37%)
ADD TO CART
Product Specifications
- Other Name: Shaft, Rear Axle ; Shaft, R/Axl; Axle Shaft
- Position: Rear
- Item Weight: 21.20 Pounds
- Item Dimensions: 44.3 x 5.5 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84018867
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2019 Chevrolet Express Submodels:
- 1 TON COMMERCIAL/RV CUTAWAY | 4 Cyl 2.8L Diesel, 6 Cyl 4.3L, 8 Cyl 6.0L, 8 Cyl 6.0L Flex, 8 Cyl 6.6L
View related parts
2019 Chevrolet Express Axle Assembly, Rear
Part Number: 84755499
$2467.48 MSRP: $3190.96
You Save: $723.48 (23%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Position: Rear
- Replaces: 84677355, 84391927
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84755499
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2019 Chevrolet Express Submodels:
- 1 TON COMMERCIAL/RV CUTAWAY | 4 Cyl 2.8L Diesel, 6 Cyl 4.3L, 8 Cyl 6.0L, 8 Cyl 6.0L Flex
View related parts
2019 Chevrolet Express Rear Axle Assembly
Part Number: 84327106
$2770.84 MSRP: $3583.29
You Save: $812.45 (23%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Axle Assembly, Rear
- Position: Rear
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84327106
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2019 Chevrolet Express Submodels:
- 1 TON CARGO EXPRESS, 1 TON PASSENGER, 3/4 TON CARGO EXPRESS, 3/4 TON PASSENGER EXPRESS | 4 Cyl 2.8L Diesel, 6 Cyl 4.3L, 8 Cyl 6.0L, 8 Cyl 6.0L Flex
View related parts
2019 Chevrolet Express Rear Axle Assembly
Part Number: 84327107
$2770.84 MSRP: $3583.29
You Save: $812.45 (23%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Axle Assembly, Rear
- Position: Rear
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84327107
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2019 Chevrolet Express Submodels:
- 1 TON CARGO EXPRESS, 1 TON PASSENGER, 3/4 TON CARGO EXPRESS, 3/4 TON PASSENGER EXPRESS | 4 Cyl 2.8L Diesel, 6 Cyl 4.3L, 8 Cyl 6.0L, 8 Cyl 6.0L Flex
View related parts
2019 Chevrolet Express Rear Axle Assembly
Part Number: 84482111
$3652.74 MSRP: $4723.77
You Save: $1071.03 (23%)
Product Specifications
- Other Name: Axle Assembly, Rear
- Position: Rear
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84482111
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2019 Chevrolet Express Submodels:
- 1 TON COMMERCIAL/RV CUTAWAY | 4 Cyl 2.8L Diesel, 6 Cyl 4.3L, 8 Cyl 6.0L, 8 Cyl 6.0L Flex
View related parts
2019 Chevrolet Express Rear Axle Assembly
Part Number: 84327109
$2770.84 MSRP: $3583.29
You Save: $812.45 (23%)
Product Specifications
- Other Name: Axle Assembly, Rear
- Position: Rear
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84327109
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2019 Chevrolet Express Submodels:
- 1 TON COMMERCIAL/RV CUTAWAY | 4 Cyl 2.8L Diesel, 6 Cyl 4.3L, 8 Cyl 6.0L, 8 Cyl 6.0L Flex
View related parts
2019 Chevrolet Express Rear Axle Assembly
Part Number: 84482108
Product Specifications
- Other Name: Axle Assembly, Rear
- Position: Rear
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84482108
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2019 Chevrolet Express Submodels:
- 1 TON COMMERCIAL/RV CUTAWAY | 4 Cyl 2.8L Diesel, 6 Cyl 4.3L, 8 Cyl 6.0L, 8 Cyl 6.0L Flex
View related parts
2019 Chevrolet Express Rear Axle Assembly
Part Number: 84482109
Product Specifications
- Other Name: Axle Assembly, Rear
- Position: Rear
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84482109
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2019 Chevrolet Express Submodels:
- 1 TON COMMERCIAL/RV CUTAWAY | 4 Cyl 2.8L Diesel, 6 Cyl 4.3L, 8 Cyl 6.0L, 8 Cyl 6.0L Flex
View related parts
2019 Chevrolet Express Rear Axle Assembly
Part Number: 84482110
Product Specifications
- Other Name: Axle Assembly, Rear
- Position: Rear
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84482110
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2019 Chevrolet Express Submodels:
- 1 TON COMMERCIAL/RV CUTAWAY | 4 Cyl 2.8L Diesel, 6 Cyl 4.3L, 8 Cyl 6.0L, 8 Cyl 6.0L Flex

2019 Chevrolet Express Axle Shaft

We are your prime source for competitively priced and high-quality OEM 2019 Chevrolet Express Axle Shaft. We provide you with parts that will allow you to save a lot of money without sacrificing quality. All our OEM parts are backed by the manufacturer's warranty and shipped out at a swift rate.

2019 Chevrolet Express Parts Questions & Experts Answers

Q: How to remove and install a semi-floating axle shaft on 2019 Chevrolet Express?
A: To remove a semi-floating axleshaft, first loosen the rear wheel lug nuts, raise the rear of the vehicle, and securely support it on jackstands while blocking the front wheels. Remove the wheel and brake disc or drum, then take off the differential cover and allow the lubricant to drain into a container. Next, remove the lock screw and, for models with a conventional differential, take out the pinion shaft. For models with a locking differential, withdraw the pinion shaft partway, rotate the differential until the shaft touches the case for access to the C-locks, and avoid turning the axleshafts afterward to prevent mispositioning of the spider gears. Have an assistant push in on the outer flanged end of the axleshaft while you remove the C-lock from the groove in the inner end of the shaft, ensuring that on models with a locking differential, the C-lock is positioned correctly before removal. Once the C-lock is removed, withdraw the axleshaft carefully to avoid damaging the oil seal, noting that it is advisable to replace the seal whenever the axleshaft is removed, and ensure any thrust washer in the differential does not fall out. For installation, insert the axleshaft into the housing and seat it securely in the differential, then install the C-lock in the axleshaft groove and pull out on the flange to lock it. Insert the pinion shaft, align the hole with the lock screw hole, and install the lock screw with a non-hardening, thread-locking compound applied to its threads before tightening it to the specified torque. Install the cover and fill the differential with the specified lubricant, then install the brake disc or drum, followed by the wheel and lug nuts, and lower the vehicle, tightening the lug nuts to the specified torque. For a full-floating axleshaft, remove the bolts attaching the axleshaft flange to the hub, tap the flange with a soft-face hammer to loosen the shaft, grip the rib in the face of the flange with locking pliers, twist the shaft slightly in both directions, and withdraw it from the housing while placing a drip pan underneath to catch any leaking lubricant. Installation is the reverse of removal, ensuring the axleshaft is held level to engage the splines at the inner end with those in the differential side gear, and always use a new gasket on the flange while keeping both the flange and hub mating surfaces free of grease and oil.

Related 2019 Chevrolet Express Parts

Alternate Year Models

2018 Chevrolet Express Axle Shaft 2020 Chevrolet Express Axle Shaft