How to remove and install a shift cable on Buick Enclave?

To remove the shift cable, set the parking brake and place chocks on the wheels and remove the driver's side floor console extension panel and disconnect the shift cable end. Unclip the shift cable housing from the shift lever bracket and remove the air filter housing air inlet duct and the air filter housing. Next, disconnect the shift cable end from the ball of the transaxle shift lever arm and remove the shift cable housing retainer. Pinch the locking tabs in and remove the cable from the shift cable bracket. Finally, remove the shift cable grommet from the engine compartment firewall and pull out the shift cable from the engine compartment end to remove it from the vehicle. To install the shift cable, simply follow the reverse order of removal. Check the shift lever for correct operation in all ranges and repeat the adjustment if necessary.

Genuine Buick Enclave Shift Cable

Transmission Shift Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Shift Cables found

View related parts
Buick Enclave Automatic Transmission Range Selector Lever Cable Assembly
Part Number: 23256076
$43.35 MSRP: $74.76
You Save: $31.41 (43%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Automatic Transmission Range Selector Lever ; Cable Assembly, A/Trns Range Sel Lvr; Control Cable, Shift Control Cable
- Replaces: 25809651, 25824455, 20922587, 22977291, 22833771, 25882560
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2017 Buick Enclave | SPORT UTILITY VEHICLE 2WD, SPORT UTILITY VEHICLE 4WD, SPORT UTILITY VEHICLE AWD | 6 Cyl 3.6L
View related parts
Buick Enclave Electronic Transmission Range Selector Man Parking R Cable Assembly
Part Number: 84363603
$39.52 MSRP: $59.90
You Save: $20.38 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Electronic Trans Range Selector Man Parking R; Control Cable, Shift Control Cable
- Replaced by: 84862515
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018 Buick Enclave | BASE EXTENDED 4 DOOR SUV, PREMIUM 1 EXTENDED 4 DOOR SUV, PREMIUM 2 EXTENDED 4 DOOR SUV | 6 Cyl 3.6L
View related parts
Buick Enclave Electronic Transmission Range Selector Man Parking R Cable Assembly
Part Number: 84595308
$39.52 MSRP: $59.90
You Save: $20.38 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Elek Trans Range Sel Man Park R; Control Cable, Shift Control Cable
- Replaced by: 84862515
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2019-2021 Buick Enclave | BASE EXTENDED 4 DOOR SUV, PREMIUM 1 EXTENDED 4 DOOR SUV, PREMIUM 2 EXTENDED 4 DOOR SUV | 6 Cyl 3.6L

Buick Enclave Shift Cable

Buick Enclave Shift Cable provides the important link between drivers who shift the console gear lever and the automatic transmission that immediately assumes the selected PRNDL range with confident accuracy. Inside every recent Enclave, the floor mounted shifter is located between the front seats, a location that is possible because the Shift Cable is routed through the console to the transmission manual lever, eliminating the bulky column linkages applied in older Buick models. Earlier vehicles applied rigid rods, but modern Enclave SUVs use a flexible steel core with low-friction casing, so the Shift Cable has no problem weaving through tight spaces without vibrating and still having a positive feel. Both methods convert hand movement to fork or lever movement, but the rod system required several joints and was prone to loosening, while the single continuous Shift Cable is primarily prone to stretching or fraying after countless shifts. To ensure Park and Reverse changes are safe, the system includes a combination of a button on the shifter handle and an electronic brake pedal interlock, which prevents the cable from traveling until the driver presses the brake pedal. When a Shift Cable degrades, symptoms such as sloppy lever action or failure to reach gear detents indicate the cable can be quickly replaced to avoid transmission damage, and the Buick driving experience will continue to be smooth.

Each OEM Buick Enclave Shift Cable we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Buick Enclave Shift Cable Parts Questions & Experts Answers

Automatic Transmission Range Selector Lever Cable Assembly
23256076
Q: How to remove and install a shift cable on Buick Enclave?
A:
To remove the shift cable, set the parking brake and place chocks on the wheels and remove the driver's side floor console extension panel and disconnect the shift cable end. Unclip the shift cable housing from the shift lever bracket and remove the air filter housing air inlet duct and the air filter housing. Next, disconnect the shift cable end from the ball of the transaxle shift lever arm and remove the shift cable housing retainer. Pinch the locking tabs in and remove the cable from the shift cable bracket. Finally, remove the shift cable grommet from the engine compartment firewall and pull out the shift cable from the engine compartment end to remove it from the vehicle. To install the shift cable, simply follow the reverse order of removal. Check the shift lever for correct operation in all ranges and repeat the adjustment if necessary.