How to remove a wheel hub bolt on Buick Rainier?

To remove a wheel hub bolts from a vehicle, begin by releasing screws holding the wheel and lifting the car with safety jack stands. After raising the car, take off the wheel and then brake rotor. In order to remove wheel hub bolt, use push tool in pressing it out through hub flange. While inserting hub flange from its backside, place new wheel hub bolt; then secure it using flat washers and lug nut on the bolt. Spin lug nut until it is fully seated in flange. After that replace caliper bracket followed by disc; lastly put back wheel as well as its nuts. Lastly, lower your vehicle and tighten all nuts according to their torque specifications of manufacturer.

Genuine Buick Rainier Wheel Hub Bolt

Wheel Stud

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Wheel Hub Bolts found

View related parts
Buick Rainier Bolt,Oil Filler Tube Support
Part Number: 11515755
$13.05 MSRP: $13.52
You Save: $0.47 (4%)
ADD TO CART
Product Specifications
- Other Name: Standard Parts
- Replaces: 11516592, 11513703, 11508280, 11517164, 25534835, 24504894
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2007 Buick Rainier | 4 DOOR | 6 Cyl 4.2L, 8 Cyl 5.3L
View related parts
Buick Rainier Bolt,Trans Brace Bracket
Part Number: 11515767
$0.89 MSRP: $1.44
You Save: $0.55 (39%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Standard Parts
- Replaces: 11508556, 11518625, 11515826, 12557011
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2007 Buick Rainier | 4 DOOR | 6 Cyl 4.2L, 8 Cyl 5.3L
View related parts
Buick Rainier Bolt,Wheel
Part Number: 9595178
$3.53 MSRP: $5.42
You Save: $1.89 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: STUD,Front and Rear Wheel
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2007 Buick Rainier | 4 DOOR | 6 Cyl 4.2L, 8 Cyl 5.3L

Buick Rainier Wheel Hub Bolt

The primary function of the Buick Rainier Wheel Hub Bolt is to clamp the hub tightly to the wheel flange to ensure that the wheel is planted and driving feel is good. Each Wheel Hub Bolt cooperates with the hub's bearing arrangement on the Buick platform, whether the SUV is equipped with a modern sealed unit that features an ABS sensor on some front-drive configurations or a hub on a non-driven axle that contains opposed tapered roller bearings. Because one damaged Rainier Wheel Hub Bolt can cause the others to bear additional stress, drivers will often first notice vague steering or uneven handling before a break actually occurs. Wheel sizes affect the number of Wheel Hub Bolt positions, with smaller rims having as few as four fasteners and larger ones using up to eight, while proper diameter ensures that each Wheel Hub Bolt seats so tightly that it doesn't loosen. Unlike more complicated components, replacing bolts requires nothing more than basic tools and no special training, so it's a simple safety solution for Buick owners of the sporty Rainier who identify the first signs of wear on their trusted ride before one of their Rainier wheels comes loose.

Each OEM Buick Rainier Wheel Hub Bolt we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Buick Rainier Wheel Hub Bolt Parts Questions & Experts Answers

Bolt,Trans Brace Bracket
11515767
Q: How to remove a wheel hub bolt on Buick Rainier?
A:
To remove a wheel hub bolts from a vehicle, begin by releasing screws holding the wheel and lifting the car with safety jack stands. After raising the car, take off the wheel and then brake rotor. In order to remove wheel hub bolt, use push tool in pressing it out through hub flange. While inserting hub flange from its backside, place new wheel hub bolt; then secure it using flat washers and lug nut on the bolt. Spin lug nut until it is fully seated in flange. After that replace caliper bracket followed by disc; lastly put back wheel as well as its nuts. Lastly, lower your vehicle and tighten all nuts according to their torque specifications of manufacturer.