How to remove and install the Ignition Control Module on Buick Century and Regal?

Take off the distributor cap and rotor. Undo the screws and Ignition Control Module. To install, coat the new Ignition Control Module with the lubricant. Install the Ignition Control Module, and retain it in place. Finally, connect the harness to the Ignition Control Module and install the distributor cap and the rotor.

Genuine Buick Regal Ignition Control Module

Ignition Spark Control Module

Enter your vehicle info to find more parts and verify fitment

Select Vehicle by VIN
Select Vehicle by Model

Select by VIN

Enter your VIN for the most accurate results.

Select by Model

-- Select Make --

-- Select Model --

-- Select Year --

9 Ignition Control Modules found

View related parts
Buick Regal Ignition Control Module Assembly
Part Number: 19245558
- Other Name: Module Asm,Ignition Coil ; Module, Distributor (Also Knock Sensor); Coil Module, ECM, Ignition Module, Module, PCM
- Replaces: 10475225, 10494012, 12617924, 10469470
$246.39 MSRP: $517.62
You Save: $271.23 (53%)

Add to Cart
More Info
Fits the following Vehicles:
1990-2004 Buick Regal | 2 DOOR, 4 DOOR, CUSTOM, CUSTOM 2 DOOR, CUSTOM 4 DOOR, GRAN SPORT 2 DOOR, GRAN SPORT 4 DOOR, GS, LIMITED, LIMITED 2 DOOR, LIMITED 4 DOOR, LS, REGAL | 6 Cyl 3.8L
Less Info
View related parts
Buick Regal Electronic Ignition Control Module Assembly (W/O Coil)
Part Number: 19245557
- Other Name: Module Asm,Electronic Ignition Control (W/O Coil)
- Replaces: 10489422
$216.96 MSRP: $455.78
You Save: $238.82 (53%)

Add to Cart
More Info
Fits the following Vehicles:
1988-2004 Buick Regal | 2 DOOR, 4 DOOR, CUSTOM, CUSTOM 2 DOOR, CUSTOM 4 DOOR, GL, GLX, GRAN SPORT 2 DOOR, GRAN SPORT 4 DOOR, GS, LIMITED, LIMITED 2 DOOR, LIMITED 4 DOOR, LS, REGAL | 6 Cyl 2.8L, 6 Cyl 3.1L
Less Info
View related parts
Buick Regal Electronic Ignition Control Module Assembly (W/O Coil)
Part Number: 19260720
- Other Name: Module Asm,Electronic Ignition Control (W/O Coil); Ignition Module, Module
- Replaces: 24503624
$237.46 MSRP: $498.88
You Save: $261.42 (53%)

Add to Cart
More Info
Fits the following Vehicles:
1986-1987 Buick Regal | REGAL | 6 Cyl 3.8L
Less Info
View related parts
Buick Regal Ignition Control Module
Part Number: 16051644
- Other Name: Mdl Out, Electronic Spark Control ; Module, Distributor (Also Knock Sensor); Ignition Module
$45.25 MSRP: $107.74
You Save: $62.49 (59%)

Add to Cart
More Info
Fits the following Vehicles:
1984-1987 Buick Regal | 2 DOOR, 4 DOOR, REGAL | 6 Cyl 3.8L
Less Info
View related parts
Buick Regal Ignition Control Module
Part Number: 16051654
- Other Name: Module
More Info
Fits the following Vehicles:
1986-1987 Buick Regal | REGAL | 6 Cyl 3.8L
Less Info
View related parts
Buick Regal Electric Sprk Control Module
Part Number: 16022654
- Other Name: Module,Electric Sprk Control; ESC Control Module, Ignition Module, Rotor
More Info
Fits the following Vehicles:
1984-1987 Buick Regal | 2 DOOR, 4 DOOR, REGAL | 6 Cyl 3.8L
Less Info
View related parts
Buick Regal Module,Knock Sensor
Part Number: 16188699
- Other Name: MODULE, Distributor (also Knock Sensor); ESC Control Module
More Info
Fits the following Vehicles:
1994-1995 Buick Regal | 2 DOOR, 4 DOOR, CUSTOM 2 DOOR, CUSTOM 4 DOOR, GRAN SPORT 2 DOOR, GRAN SPORT 4 DOOR, LIMITED 4 DOOR | 6 Cyl 3.1L
Less Info
View related parts
Buick Regal Electric Sprk Control Module
Part Number: 16022614
- Other Name: Module,Electric Sprk Control; Ignition Module
More Info
Fits the following Vehicles:
1983-1987 Buick Regal | 2 DOOR, 4 DOOR, REGAL, STATION WAGON | 6 Cyl 3.8L
Less Info
View related parts
Buick Regal Electronic Ignition Control Module Assembly
Part Number: 25518358
- Other Name: Module Asm,Electronic Ignition Control; Ignition Coil
More Info
Fits the following Vehicles:
1984-1985 Buick Regal | 2 DOOR, 4 DOOR, REGAL | 6 Cyl 3.8L
Less Info

Buick Regal Ignition Control Module Parts Questions & Answers

Electronic Ignition Control Module Assembly (W/O Coil)
19260720
Q: How to remove and install the Ignition Control Module on Buick Century and Regal?
A: Take off the distributor cap and rotor. Undo the screws and Ignition Control Module. To install, coat the new Ignition Control Module with the lubricant. Install the Ignition Control Module, and retain it in place. Finally, connect the harness to the Ignition Control Module and install the distributor cap and the rotor.