The turn signal and hazard flasher units on these models are located under the instrument panel, near the fuse block. For 1995 and earlier models, separate turn signal and hazard flasher units are used; the hazard flasher unit is positioned above the fuse block, while the turn signal flasher is attached to the trim panel below the hood release handle with a retaining clip. In 1996 and later models, a single flasher unit controls both systems. To locate the flasher unit, remove the driver's side knee bolster. If the flasher units are not labeled, activate one of the two systems to hear and feel the flasher click on-and-off as it operates. To replace a flasher unit, simply unplug the old one and install the new one in its place.