To take out the center floor console, you should first remove the front seats and either pull or pry the front tray out. Also, any electrical connectors for wiring harnesses that go to the main instrument panel must be disconnected by you and then forward trim on each side of the console removed. Be careful so as not to damage anything while sliding the console out of the vehicle. To remove the front overhead console, therefore, what is required is removal of map light lens and mounting screws before pulling or prying down on it in order to release its retainers. Last but not least, unplug all electrical connectors and get rid of this unit. On rear overhead console, remove DVD player if equipped mount screws; pull or pry down on it in order to release its retainers; unplug all electrical connectors and take it off. Conversely, set up these devices using an opposite way which one used during their removal process.