How to replace the hood cable on Chevrolet Beretta?

Inside the car, unfasten the trim panel to get to wires attached to the two screws which are behind the hood latch handle; and having taken out the retaining screws of the handle with a Phillips screwdriver, the handle detaches. Loss of hood latch cable is done in compartment; pry the cable grommet out of the clip and pry the clip back, lift the cable up. Take a piece of string or thin wire; insert it through the other end of the cable into the passenger compartment and tie it tightly after it is passed through into the engine compartment then using the string or thin wire connect it to the new cable and pull it back to the engine compartment. Last but not the least, carry on the cable connection and fix the latch screws along with the trim panel.

Genuine Chevrolet Beretta Hood Cable

Hood Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Hood Cables found

View related parts
Chevrolet Beretta Cable Assembly, Hood Primary Latch Release
Part Number: 22645049
$16.51 MSRP: $48.50
You Save: $31.99 (66%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: CABLE, Hood Latch; Release Cable
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1989-1996 Chevrolet Beretta | 2 DOOR, 4 DOOR, Z26 2 DOOR | 4 Cyl 2.0L, 4 Cyl 2.2L, 4 Cyl 2.3L, 6 Cyl 2.8L, 6 Cyl 3.1L
View related parts
Chevrolet Beretta Chart, Cable Assembly, Hood Primary Latch
Part Number: 10115330
$14.70 MSRP: $28.05
You Save: $13.35 (48%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: CABLE, Hood Latch; Release Cable
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1987-1991 Chevrolet Beretta | 2 DOOR, 4 DOOR, 4 DOOR NOTCHBACK, LTZ | 4 Cyl 2.0L, 4 Cyl 2.2L, 4 Cyl 2.3L, 6 Cyl 2.8L, 6 Cyl 3.1L

Chevrolet Beretta Hood Cable

Each OEM Chevrolet Beretta Hood Cable we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Chevrolet Beretta Hood Cable Parts Questions & Experts Answers

Chart, Cable Assembly, Hood Primary Latch
10115330
Q: How to replace the hood cable on Chevrolet Beretta?
A:
Inside the car, unfasten the trim panel to get to wires attached to the two screws which are behind the hood latch handle; and having taken out the retaining screws of the handle with a Phillips screwdriver, the handle detaches. Loss of hood latch cable is done in compartment; pry the cable grommet out of the clip and pry the clip back, lift the cable up. Take a piece of string or thin wire; insert it through the other end of the cable into the passenger compartment and tie it tightly after it is passed through into the engine compartment then using the string or thin wire connect it to the new cable and pull it back to the engine compartment. Last but not the least, carry on the cable connection and fix the latch screws along with the trim panel.

Related Chevrolet Beretta Parts

Browse by Year

1996 Hood Cable 1995 Hood Cable 1994 Hood Cable 1993 Hood Cable 1992 Hood Cable 1991 Hood Cable 1990 Hood Cable 1989 Hood Cable 1988 Hood Cable 1987 Hood Cable