How to remove and install the ignition coils and module assembly on Chevrolet Beretta?

To remove and install the ignition coils and ignition control module assembly, first disconnect the battery's negative terminal. If needed, remove the cooling fan for access. Unplug the module's electrical connectors and label and detach the coil wires. Remove the assembly bolts and lift it out. Separate the coils from the ignition control module by removing their bolts. If removing the ignition system assembly, disconnect the IOI harness, remove assembly-to-camshaft bolts, lift it off, and detach the housing. Disconnect coil harnesses, remove coils, and then remove the ignition control module from the cover using screws. Reinstall in the reverse order.

Genuine Chevrolet Beretta Ignition Coil

Ignition Coil Resistor

Enter your vehicle info to find more parts and verify fitment

Select Vehicle by VIN
Select Vehicle by Model

Select by VIN

Enter your VIN for the most accurate results.

Select by Model

-- Select Make --

-- Select Model --

-- Select Year --

2 Ignition Coils found

View related parts
Chevrolet Beretta Ignition Coil Assembly
Part Number: 19353734
- Other Name: Coil Asm,Ignition; Coil, Coil Assembly, Ignition Coil
- Replaced by: 19418991
$54.39 MSRP: $114.26
You Save: $59.87 (53%)

Add to Cart
More Info
Fits the following Vehicles:
1987-1996 Chevrolet Beretta | 2 DOOR, 4 DOOR, 4 DOOR NOTCHBACK, 4 DOOR PLAIN BACK HATCHBACK, LTZ, Z26 2 DOOR | 4 Cyl 2.0L, 4 Cyl 2.2L, 6 Cyl 2.8L, 6 Cyl 3.1L
Less Info
View related parts
Chevrolet Beretta Ignition Coil
Part Number: 19166375
- Other Name: Coil,Ignition; Coil
- Replaces: 10457109, 10472748, 10474481, 10457062
$41.71 MSRP: $99.31
You Save: $57.60 (59%)

Add to Cart
More Info
Fits the following Vehicles:
1990-1994 Chevrolet Beretta | 2 DOOR, 4 DOOR, 4 DOOR NOTCHBACK, 4 DOOR PLAIN BACK HATCHBACK, LTZ, Z26 2 DOOR | 4 Cyl 2.3L
Less Info

Chevrolet Beretta Ignition Coil Parts Questions & Answers

Ignition Coil Assembly
19353734
Q: How to remove and install the ignition coils and module assembly on Chevrolet Beretta?
A: To remove and install the ignition coils and ignition control module assembly, first disconnect the battery's negative terminal. If needed, remove the cooling fan for access. Unplug the module's electrical connectors and label and detach the coil wires. Remove the assembly bolts and lift it out. Separate the coils from the ignition control module by removing their bolts. If removing the ignition system assembly, disconnect the IOI harness, remove assembly-to-camshaft bolts, lift it off, and detach the housing. Disconnect coil harnesses, remove coils, and then remove the ignition control module from the cover using screws. Reinstall in the reverse order.