How to properly remove and install a tie rod end on Chevrolet Camaro?

Tighten the front wheel lug nuts, bring the vehicle to a stop, set the parking brake, apply the break, and lift the front part of the vehicle before placing on jack stands and then remove the front wheel. With the tie-rod placed on the flat sections, use a wrench to loosen the jam nut so as to show the position of the tie-rod end in relationship to threads. Lose the tie-rod end ball stud nut without totally pulling it away, then, remove the tie-rod end from the steering knuckle arm by using a puller and removing the nut of the tie-rod end. Remove the nut of the tie-rod-end and unbolt it from the tie-rod. For installation, pass the tie-rod end through the marked position and then pass the stud through the hole on the steering knuckle arm, then tighten the jam nut. Place the nut on the ball stud and take the measurements of the torque to the right amount. Lastly put back the wheel accompanied by lughnut and raise the automobile, and then indexed the lughnuts to the required torque, please also note to check your automobile for wheel alignment if the need arises.

Genuine Chevrolet Camaro Tie Rod End

Steering Rod End

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Tie Rod Ends found

View related parts
Chevrolet Camaro Rod Kit, Steering Linkage Outer Tie
Part Number: 92241266
$59.28 MSRP: $101.37
You Save: $42.09 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: ROD KIT, Steering Tie Rod Outer; Outer Tie Rod
- Position: Outer
- Replaces: 92227431
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2015 Chevrolet Camaro | 2 DOOR CONVERTIBLE, 2 DOOR COUPE, LS 2 DOOR COUPE, LT 2 DOOR CONVERTIBLE, LT 2 DOOR COUPE, SS 2 DOOR CONVERTIBLE, SS 2 DOOR COUPE | 6 Cyl 3.6L, 8 Cyl 6.2L
View related parts
Chevrolet Camaro End Kit, Steering Linkage Tie Rod Inner
Part Number: 92227430
$42.07 MSRP: $71.29
You Save: $29.22 (41%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: END KIT, Steering Tie Rod Inner; Inner Tie Rod
- Position: Inner
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2015 Chevrolet Camaro | 2 DOOR CONVERTIBLE, 2 DOOR COUPE, LS 2 DOOR COUPE, LT 2 DOOR CONVERTIBLE, LT 2 DOOR COUPE, SS 2 DOOR CONVERTIBLE, SS 2 DOOR COUPE | 6 Cyl 3.6L, 8 Cyl 6.2L, 8 Cyl 7.0L
View related parts
Chevrolet Camaro ROD ASM-STRG LNKG OTR TIE
Part Number: 87827847
$89.72 MSRP: $154.77
You Save: $65.05 (43%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaces: 22961958, 22961954
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2023 Chevrolet Camaro | 2 DOOR CONVERTIBLE 1LS/1LT, 2 DOOR CONVERTIBLE 1LT, 2 DOOR CONVERTIBLE 1SS, 2 DOOR CONVERTIBLE 2LT, 2 DOOR CONVERTIBLE 2SS, 2 DOOR CONVERTIBLE HI PERFORMANCE, 2 DOOR CONVERTIBLE HIGH PERFORMANCE, 2 DOOR COUPE 1LS/1LT, 2 DOOR COUPE 1LT, 2 DOOR COUPE 1SS, 2 DOOR COUPE 2LT, 2 DOOR COUPE 2SS, 2 DOOR COUPE HI PERFORMANCE, 2 DOOR COUPE HIGH PERFORMANCE | 4 Cyl 2.0L, 6 Cyl 3.6L, 8 Cyl 6.2L
View related parts
Chevrolet Camaro ROD ASM-STRG LNKG OTR TIE
Part Number: 87827846
$90.52 MSRP: $154.77
You Save: $64.25 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaces: 22961957, 84257794, 22961953
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2024 Chevrolet Camaro | 2 DOOR CONVERTIBLE 1LS/1LT, 2 DOOR CONVERTIBLE 1LT, 2 DOOR CONVERTIBLE 1SS, 2 DOOR CONVERTIBLE 2LT, 2 DOOR CONVERTIBLE 2SS, 2 DOOR CONVERTIBLE HI PERFORMANCE, 2 DOOR CONVERTIBLE HIGH PERFORMANCE, 2 DOOR COUPE 1LS/1LT, 2 DOOR COUPE 1LT, 2 DOOR COUPE 1SS, 2 DOOR COUPE 2LT, 2 DOOR COUPE 2SS, 2 DOOR COUPE HI PERFORMANCE, 2 DOOR COUPE HIGH PERFORMANCE | 4 Cyl 2.0L, 6 Cyl 3.6L, 8 Cyl 6.2L
View related parts
Chevrolet Camaro ROD KIT-STRG LNKG OTR TIE
Part Number: 84494628
$43.64 MSRP: $106.95
You Save: $63.31 (60%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Outer Tie Rod
- Replaces: 22776539
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2012-2015 Chevrolet Camaro | SS 2 DOOR CONVERTIBLE, SS 2 DOOR COUPE | 6 Cyl 3.6L, 8 Cyl 6.2L, 8 Cyl 7.0L
View related parts
Chevrolet Camaro Rod Kit,Steering Linkage Outer Tie
Part Number: 21011027
Product Specifications
- Other Name: ROD KIT, Steering Tie Rod Outer; Outer Tie Rod, Tie Rod
- Position: Outer
- Replaces: 26026743
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1993-2002 Chevrolet Camaro | 2 DOOR, CONVERTIBLE | 6 Cyl 3.4L, 6 Cyl 3.8L, 8 Cyl 5.7L
View related parts
Chevrolet Camaro Rod Kit,Outer Tie
Part Number: 7837614
Product Specifications
- Other Name: ROD KIT, Steering Tie Rod Outer; Outer Tie Rod, Outer Tie Rod Kit
- Position: Outer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1982-1992 Chevrolet Camaro | 2 DOOR, 4 DOOR, RS 2 DOOR, RS CONVERTIBLE | 4 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 3.1L, 8 Cyl 5.0L, 8 Cyl 5.7L

Chevrolet Camaro Tie Rod End

On Chevrolet Camaro, the Tie Rod End is an important component which links the steering rack to the steering knuckles. This link is crucial for achieving and sustaining car stability and as a result control over the vehicle direction. The Tie Rod End consists of two components: the inner tie rod end and the outer tie rod end, both of them are very essential tool for easy steering. In the years of designing Chevrolet Camaro models, several types of Tie Rod End were used depending on the design changes and the changes in performance characteristics. The role of such seats is to provide comfort for drivers and passengers, however, the characteristic might be modified concerning the construction materials or certain attributes affecting sturdiness and sensitivity.

Each OEM Chevrolet Camaro Tie Rod End we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Chevrolet Camaro Tie Rod End Parts Questions & Experts Answers

Rod Kit, Steering Linkage Outer Tie
92241266
Q: How to properly remove and install a tie rod end on Chevrolet Camaro?
A:
Tighten the front wheel lug nuts, bring the vehicle to a stop, set the parking brake, apply the break, and lift the front part of the vehicle before placing on jack stands and then remove the front wheel. With the tie-rod placed on the flat sections, use a wrench to loosen the jam nut so as to show the position of the tie-rod end in relationship to threads. Lose the tie-rod end ball stud nut without totally pulling it away, then, remove the tie-rod end from the Steering Knuckle arm by using a puller and removing the nut of the tie-rod end. Remove the nut of the tie-rod-end and unbolt it from the tie-rod. For installation, pass the tie-rod end through the marked position and then pass the stud through the hole on the steering knuckle arm, then tighten the jam nut. Place the nut on the ball stud and take the measurements of the torque to the right amount. Lastly put back the wheel accompanied by lughnut and raise the automobile, and then indexed the lughnuts to the required torque, please also note to check your automobile for wheel alignment if the need arises.