How to remove the MAP Sensor on Chevrolet Cobalt?

With the ignition off, disconnect the MAP sensor's electrical connection, pull out the mounting bolt, and start work on these 2005 and later models with 2.0L supercharged, 2.2L, or 2.4L engines. The MAP sensor is located on the intake manifold behind the throttle body for 2.2L and 2.4L engines, while 2.0L engines have two sensors: At the right end of your intake manifold is the TMAP sensor, and high on top of the left supercharger is the SCIP sensor. To take out the throttle body, you must make sure you can access the sensor. To detach the sensor thanks to the easy-to-remove locking clip, push the two ends together, pull it free, and take the sensor off. To get access to the 2.0L turbo engine MAP sensor, remove its electrical connector from the intake manifold above the throttle body. Then take out the mounting screws and lift off the sensor. To install the sensor correctly, you need to replace it entirely on 2005 and later models when the sealing damage shows up. The installation process runs in the opposite direction from removal.

Genuine Chevrolet Cobalt MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 MAP Sensors found

View related parts
Chevrolet Cobalt Sensor Assembly, Map
Part Number: 55573248
$30.62 MSRP: $50.68
You Save: $20.06 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: SENSOR, Computer Control Sensors
- Replaces: 12591290, 93192107
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chevrolet Cobalt | 2 DOOR, 4 DOOR, LEVEL 4 PERFORMANCE/SC (SS) 2 DOOR, LEVEL 4 PERFORMANCE/SC (SS) 4 DOOR, LEVEL ONE (LS) 2 DOOR, LEVEL ONE (LS) 4 DOOR, LEVEL THREE (SS) 2 DOOR, LEVEL THREE (SS) 4 DOOR, LEVEL TWO (LT) 2 DOOR, LEVEL TWO (LT) 4 DOOR | 4 Cyl 2.2L, 4 Cyl 2.4L
View related parts
Chevrolet Cobalt SENSOR ASM,MAP
Part Number: 19418808
$73.03 MSRP: $125.98
You Save: $52.95 (43%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: M.A.P. Sensor, Map Sensor, Valve Assembly
- Replaces: 16249939, 09359409, 12614973, 16187556, 9359409
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2007 Chevrolet Cobalt | LEVEL 4 PERFORMANCE (SS) 2 DOOR, LEVEL 4 PERFORMANCE/SC (SS) 2 DOOR | 4 Cyl 2.0L
View related parts
Chevrolet Cobalt SENSOR ASM,MAP
Part Number: 19418807
$75.67 MSRP: $129.40
You Save: $53.73 (42%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: M.A.P. Sensor, Map Sensor
- Replaces: 12614970, 16212460
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2008 Chevrolet Cobalt | 2 DOOR, 4 DOOR, LEVEL 4 PERFORMANCE (SS) 2 DOOR, LEVEL 4 PERFORMANCE/SC (SS) 2 DOOR, LEVEL ONE (LS) 2 DOOR, LEVEL ONE (LS) 4 DOOR, LEVEL THREE (SS) 2 DOOR, LEVEL THREE (SS) 4 DOOR, LEVEL TWO (LT) 2 DOOR, LEVEL TWO (LT) 4 DOOR | 4 Cyl 2.2L, 4 Cyl 2.4L
View related parts
Chevrolet Cobalt SENSOR ASM,MAP
Part Number: 19418810
$70.00 MSRP: $142.80
You Save: $72.80 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaces: 09350899, 12580698, 12615136, 9350899
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2007 Chevrolet Cobalt | LEVEL 4 PERFORMANCE (SS) 2 DOOR, LEVEL 4 PERFORMANCE/SC (SS) 2 DOOR | 4 Cyl 2.0L
View related parts
Chevrolet Cobalt SENSOR ASM,INT AIR PRESS & TEMP
Part Number: 19432714
$61.18 MSRP: $105.53
You Save: $44.35 (43%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaces: 90423637
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2007 Chevrolet Cobalt | LEVEL 4 PERFORMANCE (SS) 2 DOOR, LEVEL 4 PERFORMANCE/SC (SS) 2 DOOR | 4 Cyl 2.0L
View related parts
Chevrolet Cobalt Sensor Assembly, Map
Part Number: 12592016
Product Specifications
- Other Name: SENSOR, Computer Control Sensors; M.A.P. Sensor, Map Sensor
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2010 Chevrolet Cobalt | LEVEL 4 PERFORMANCE/SC (SS) 2 DOOR, LEVEL 4 PERFORMANCE/SC (SS) 4 DOOR | 4 Cyl 2.0L

Chevrolet Cobalt MAP Sensor

This Chevrolet Cobalt MAP Sensor is simply a sensor that measures the amount of pressure, namely positive air pressure, which is incoming to the intake manifold and relays this information to the ECU for fuel adjusting. In fuel injected engines the MAP sensor helps in the computation of the air density to identify the appropriate air/fuel mixture for combustion. While MAP and MAF sensor may be found in naturally aspirated engines, forced induction engines will tend to incorporate both. This is especially the case given the fact that the MAP sensor is crucial in the on-board diagnostics, and also that it translates data into air mass with the help of the intake air temperature sensor, thus being very useful in monitoring and sustaining the efficiency of the car's engine.

Each OEM Chevrolet Cobalt MAP Sensor we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Chevrolet Cobalt MAP Sensor Parts Questions & Experts Answers

Sensor Assembly, Map
12614973
Q: How to remove the MAP Sensor on Chevrolet Cobalt?
A:
With the ignition off, disconnect the MAP sensor's electrical connection, pull out the mounting bolt, and start work on these 2005 and later models with 2.0L supercharged, 2.2L, or 2.4L engines. The MAP sensor is located on the intake manifold behind the throttle body for 2.2L and 2.4L engines, while 2.0L engines have two sensors: At the right end of your intake manifold is the TMAP sensor, and high on top of the left supercharger is the SCIP sensor. To take out the throttle body, you must make sure you can access the sensor. To detach the sensor thanks to the easy-to-remove locking clip, push the two ends together, pull it free, and take the sensor off. To get access to the 2.0L turbo engine MAP sensor, remove its electrical connector from the intake manifold above the throttle body. Then take out the mounting screws and lift off the sensor. To install the sensor correctly, you need to replace it entirely on 2005 and later models when the sealing damage shows up. The installation process runs in the opposite direction from removal.