My Garage
My Account
Cart
Genuine Chevrolet Corvette Intercooler
Front Intercooler- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Intercoolers found
Chevrolet Corvette Cooler Assembly, Charging Air
Part Number: 12598644$486.72 MSRP: $776.26You Save: $289.54 (38%)Ships in 1-2 Business Days
Chevrolet Corvette Cooler Assembly, Chrg Air
Part Number: 84484399$178.50 MSRP: $284.69You Save: $106.19 (38%)Ships in 1-3 Business Days
Chevrolet Corvette Intercooler
The intercooler as used on Chevrolet Corvette automobiles is crucial in the improvement of the engines efficiency via cooling of the compressed air prior to its entry into the combustion chambers. This cooling process enhances power output besides curtailing pre-ignition helping in attaining a denser air charge to allow for extra fuel injection. Chevrolet Corvette models may employ air-to-air or air-to-liquid intercoolers, where a bulk of vehicles may employ air to air intercoolers since they are lighter, air to liquid intercoolers are heavier and are used in certain conditions such as in marine applications. Year on year, Chevrolet Corvette has used different types of intercooler to improve forced induction systems especially those normally associated with turbochargers and superchargers. These intercoolers help make the engines of the automobile efficient and effective which in turn makes the Chevrolet Corvette a sports automobile that it is today.
Each OEM Chevrolet Corvette Intercooler we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.
Chevrolet Corvette Intercooler Parts Questions & Experts Answers
- Q: What precautions should be taken when filling the intercooler system with coolant on Chevrolet Corvette?A:The intercooler system must be completely free of air, or the system will not perform properly and the intercooler may become noisy. Begin by lifting the engine cover up, one side at a time, until it is free of the ball studs, then slide it forward and off the engine. Loosen the bleed screws at the top front corners of the supercharger manifold. Rotate the intercooler fill port fitting to the upright position, raising the hose slightly higher than the other intercooler components. Remove the cap and add a 50/50 coolant and water mixture to the fitting until coolant flows out of the bleeders, then tighten the bleeder screws. It is advisable to have plenty of rags or newspapers handy for mopping up coolant that comes out from the bleeder screws, and wearing rubber gloves while working with coolant is a good idea. After installing the cap, start the engine and let it run for one minute. Turn the engine off and allow the coolant in the fitting to stabilize for one minute, then remove the cap from the fitting. Add more 50/50 coolant mixture until the coolant level is near the top of the fitting, repeating the previous steps as necessary. Remove the cap and check for bubbles, waiting fifteen minutes and refilling as necessary before installing the cap. Continue this procedure until the coolant level within the fitting does not drop, and no more bubbles are present.
